Temperature spikes after component adjustments

demarty
Member

10-25-2018, 03:19 AM

I'm sorry for any confusion, but I made some errors in my writing. Two days ago I switched my case, PSU, RAM, and SSD. After that, I reset my BIOS and OS but I'm still having trouble with the CPU temperature during idle. I don't know what's causing the issue. I'm trying to change the PSU again and check the temperatures, but it's still around 50°C. I'm worried the temperature is too high, even though I think I applied the thermal paste correctly. I need some advice. My build is an i9 9900k, RTX 2080 Hx1500i, Corsair 5000t H100i.

demarty

10-25-2018, 03:19 AM #1

itza_red_panda
Member

220

10-25-2018, 02:50 PM

What's the heat when things are under stress? Like after a short Cinebench run. 50°C is just okay.

itza_red_panda

10-25-2018, 02:50 PM #2

What's the heat when things are under stress? Like after a short Cinebench run. 50°C is just okay.

Nickthegreat43
Member

10-26-2018, 01:35 PM

50 indicates idle performance at 100 degrees. After restarting the system post-load, it reports a CPU temperature warning.

Nickthegreat43

10-26-2018, 01:35 PM #3

50 indicates idle performance at 100 degrees. After restarting the system post-load, it reports a CPU temperature warning.

coolboy348
Junior Member

11-09-2018, 03:04 AM

Reinstall and reattach the AIO l, then verify the pump and fan configurations are correct.

coolboy348

11-09-2018, 03:04 AM #4

Reinstall and reattach the AIO l, then verify the pump and fan configurations are correct.

Onghanson
Junior Member

11-29-2018, 05:31 PM

Yes, you can access settings through the BIOS.

Onghanson

11-29-2018, 05:31 PM #5

Yes, you can access settings through the BIOS.

frog76
Member

177

11-29-2018, 08:06 PM

Download the icon and verify it in Windows. Ensure the pump is active on balances or extreme, and add fans at a static 1200rpm. Observe if this improves the situation.

frog76

11-29-2018, 08:06 PM #6

Download the icon and verify it in Windows. Ensure the pump is active on balances or extreme, and add fans at a static 1200rpm. Observe if this improves the situation.

Buddy_The_Hero
Member

224

11-29-2018, 09:38 PM

They seem fine, but there might be another issue—some of your motherboard pins could be damaged. Could this lead to overheating on the motherboard?

Buddy_The_Hero

11-29-2018, 09:38 PM #7

They seem fine, but there might be another issue—some of your motherboard pins could be damaged. Could this lead to overheating on the motherboard?

DGY_DinoGamez
Member

191

11-30-2018, 08:53 PM

Maybe extra force is coming from the remaining pins.

DGY_DinoGamez

11-30-2018, 08:53 PM #8

Maybe extra force is coming from the remaining pins.