Technical issues with RAM.

axsthetiic
Member

218

08-28-2023, 11:23 PM

You're experiencing a common issue with XMP profiles and BIOS settings. It sounds like the system is trying to maintain the higher speed (3200 MHz) but the BIOS is reverting it back to the default (2133 MHz). This could be due to BIOS behavior or conflicts. Check if the XMP profile is correctly applied and ensure no conflicting settings are active. If the problem persists, try resetting the BIOS or consulting Corsair's support for compatibility issues.

axsthetiic

08-28-2023, 11:23 PM #1

Benxium
Junior Member

08-29-2023, 03:02 PM

The CMOS battery might be dead. Try replacing it and observe the outcome. It seems to have drained completely, which means your BIOS settings aren't being preserved.

Benxium

08-29-2023, 03:02 PM #2

The CMOS battery might be dead. Try replacing it and observe the outcome. It seems to have drained completely, which means your BIOS settings aren't being preserved.

THEBLUEBOLT
Member

212

09-03-2023, 08:11 PM

Tell me about the processor and motherboard you're using.

THEBLUEBOLT

09-03-2023, 08:11 PM #3

Tell me about the processor and motherboard you're using.

New_air_games
Member

208

09-03-2023, 08:55 PM

Two devices measuring 2600x and B450 Gigabyte

New_air_games

09-03-2023, 08:55 PM #4

Two devices measuring 2600x and B450 Gigabyte

LoreleiBella
Junior Member

09-05-2023, 02:53 PM

The 2600x and B450 Gigabyte are now available!

LoreleiBella

09-05-2023, 02:53 PM #5

The 2600x and B450 Gigabyte are now available!

WeeZiii
Junior Member

09-06-2023, 02:37 AM

The battery typically lasts for a certain period, though it can vary based on usage and conditions.

WeeZiii

09-06-2023, 02:37 AM #6

The battery typically lasts for a certain period, though it can vary based on usage and conditions.

jackyvb27
Junior Member

09-06-2023, 05:16 PM

About three years ago.

jackyvb27

09-06-2023, 05:16 PM #7

About three years ago.

eskwindmill
Junior Member

09-06-2023, 08:40 PM

When you open BIOS and turn on XMP, adjust the DRAM voltage to 1.35 and the SOC voltage to 1.05. This should improve stability. The Ryzen 2000 series often faces issues with memory controllers and may need a higher voltage for stable performance at 3200 MHz.

eskwindmill

09-06-2023, 08:40 PM #8

iZacksS
Member

174

09-06-2023, 09:46 PM

Thanks! I'll try it out and let you know what happens.

iZacksS

09-06-2023, 09:46 PM #9

Thanks! I'll try it out and let you know what happens.

THEGELSYS
Junior Member

09-11-2023, 09:06 PM

#10

Thanks! It looks like it functioned properly.

THEGELSYS

09-11-2023, 09:06 PM #10

Thanks! It looks like it functioned properly.