TCP/IP 2.0相关问题
TCP/IP 2.0相关问题
Check if the TPM device settings were saved correctly. Ensure the firmware is enabled properly and verify that the BIOS supports the changes. Try resetting the system or reapplying the settings. If issues persist, consult the motherboard manual for specific TPM configuration steps.
I believe "F10" means "Save and Exit" on your board. When you update TPMs, the motherboard usually needs confirmation, either right away or during the next boot. If you respond with "no" or don't answer after a while, it will go back to the prior setting. Does your display show a "Are you sure?" prompt?