F5F Stay Refreshed Hardware Desktop System shuts down unexpectedly.

System shuts down unexpectedly.

System shuts down unexpectedly.

K
kittymitty69
Member
190
12-31-2021, 08:46 PM
#1
Hey everyone, my friend recently purchased a PC and is attempting to upgrade the RAM from 2133MHz to 2400MHz. After a few hours of work, the machine starts showing blue screens due to memory management issues. However, when he uses the 2133MHz in single-channel mode, everything functions properly.
K
kittymitty69
12-31-2021, 08:46 PM #1

Hey everyone, my friend recently purchased a PC and is attempting to upgrade the RAM from 2133MHz to 2400MHz. After a few hours of work, the machine starts showing blue screens due to memory management issues. However, when he uses the 2133MHz in single-channel mode, everything functions properly.

T
TroubleAffeHD
Member
127
01-03-2022, 06:30 PM
#2
Identify likely failure points and confirm BIOS memory configurations are correct.
T
TroubleAffeHD
01-03-2022, 06:30 PM #2

Identify likely failure points and confirm BIOS memory configurations are correct.

N
Nikos3434
Member
133
01-05-2022, 07:07 AM
#3
I believe the processor doesn't have enough capacity to handle the RAM stick at this rate, especially with an i5-7500
N
Nikos3434
01-05-2022, 07:07 AM #3

I believe the processor doesn't have enough capacity to handle the RAM stick at this rate, especially with an i5-7500

M
MarsBar10000
Junior Member
42
01-05-2022, 02:32 PM
#4
Typically, anything above 2666 MHz for DDR4 is seen as an overclock.
M
MarsBar10000
01-05-2022, 02:32 PM #4

Typically, anything above 2666 MHz for DDR4 is seen as an overclock.

S
Sakakhou
Junior Member
16
01-05-2022, 09:55 PM
#5
He doesn't meet the requirement at 2400 MHz
S
Sakakhou
01-05-2022, 09:55 PM #5

He doesn't meet the requirement at 2400 MHz

C
Chickenfreak10
Member
137
01-07-2022, 03:21 PM
#6
He acquired this set.
C
Chickenfreak10
01-07-2022, 03:21 PM #6

He acquired this set.

Z
zanawesome
Junior Member
11
01-22-2022, 12:23 AM
#7
Did you think the 2400 mhz memory could fail? The CPU should handle it just fine. Look into BIOS settings and possibly revert to default configurations. (jumpers/buttons or remove battery/power cord) Also, test one stick at a time, which might help identify a potentially faulty stick.
Z
zanawesome
01-22-2022, 12:23 AM #7

Did you think the 2400 mhz memory could fail? The CPU should handle it just fine. Look into BIOS settings and possibly revert to default configurations. (jumpers/buttons or remove battery/power cord) Also, test one stick at a time, which might help identify a potentially faulty stick.

F
Farcowz
Junior Member
35
01-22-2022, 06:07 PM
#8
We attempted this method, but with just one stick it appears the blue screen won’t appear in any slot that’s filled. It might mean the motherboard is damaged, especially since there are only two RAM slots available.
F
Farcowz
01-22-2022, 06:07 PM #8

We attempted this method, but with just one stick it appears the blue screen won’t appear in any slot that’s filled. It might mean the motherboard is damaged, especially since there are only two RAM slots available.