System powers up yet fails to boot following the AIO upgrade.
System powers up yet fails to boot following the AIO upgrade.
Yes, I don’t have integrated graphics, so I’ve been using the ports on my GPU. It doesn’t fit when the riser is inserted, which is why I’m trying to avoid this. I might need to remove it if you think there’s a chance the riser or vertical mount is faulty.
Consider these steps: Confirm all connectors are securely placed, focusing on the motherboard 24-pin and CPU 8-pin. Re-seat the CPU and RAM. Restart the PC after each attempt to check if the problem persists. Perform a CMOS reset, wait ten minutes, then reinstall the battery.
I reset the CMOS, inserted another RAM stick, and turned it on. After about 5 to 10 minutes, the system didn’t show any debug lights, yet nothing was functioning. It still wouldn’t start, and the usual indicators for power loss and activation remained inactive.
Checked the reseats on all cables and parts. Also confirmed which RAM slots were filled.
I didn’t reposition the CPU since I’m out of thermal paste. I also didn’t reattach all the cables. I cleaned and reinserted the GPU and CPU power connectors, then pushed everything firmly to ensure they’re secure. The single stick RAM was in slot A2, while the second stick went into slot B2.
You're asking about how to handle cables carefully during installation.
I realized I needed fresh paste for just the CPU and GPU connections. I didn’t pull out all the cables, only those linking the CPU to the GPU. I double-checked that everything else was securely connected. Next, I’ll reinsert the CPU and cooler to test the situation.
You removed the clear plastic label from the bottom of the pump or block when installing the new AIO cooler. It seems the device started overheating right away, as if it was trying to protect itself. Did you replace your power supply unit or modify any connections on that PSU? You connected the monitor directly to the GPU rather than the motherboard. You can remove the pump or block from the CPU and inspect components before reinstalling using the original grease. Once you break the first seal and reattach it, air gaps form and damage the thermal paste, making future installation difficult—so you’ll need to reapply it properly after diagnosing the problem. Also, remember to keep a complete inventory of your old parts for future swaps or testing. Corsairs Vengeance Ram is quite particular, especially with Ryzen processors. Luckily, their warranty service is excellent and the RAM comes with a lifetime warranty.
All plastic stickers have been removed from the AIO, and the monitors are connected directly to the GPU. I didn’t modify any settings on my PSU or its wiring. Perhaps I should explore your concerns about the RAM next.