F5F Stay Refreshed Hardware Desktop System halts during maintenance task.

System halts during maintenance task.

System halts during maintenance task.

Pages (2): 1 2 Next
P
pvpprobro
Member
141
03-21-2021, 10:03 AM
#1
It's been happening again to me. After cleaning my PC, I still experience freezing when playing Valorant. It seems to occur occasionally, not always, but it’s noticeable. Stress tests worked fine before, but now it’s affecting gameplay. The first time I fixed it, I checked the connections and everything looked good, yet it disappeared. This time I’m unsure what’s causing it. My friend mentioned switching power strips and it helped, so I’m considering that option. What do you think?
P
pvpprobro
03-21-2021, 10:03 AM #1

It's been happening again to me. After cleaning my PC, I still experience freezing when playing Valorant. It seems to occur occasionally, not always, but it’s noticeable. Stress tests worked fine before, but now it’s affecting gameplay. The first time I fixed it, I checked the connections and everything looked good, yet it disappeared. This time I’m unsure what’s causing it. My friend mentioned switching power strips and it helped, so I’m considering that option. What do you think?

L
LionSpear
Member
214
03-22-2021, 05:48 PM
#2
No, I didn't notice any cable connections being misplaced.
L
LionSpear
03-22-2021, 05:48 PM #2

No, I didn't notice any cable connections being misplaced.

F
Famas69
Junior Member
31
03-23-2021, 05:26 PM
#3
Would you like to see the complete details?
F
Famas69
03-23-2021, 05:26 PM #3

Would you like to see the complete details?

I
ILoveWindows
Junior Member
1
03-23-2021, 09:19 PM
#4
It seems the issue is related to Valorant rather than the equipment.
I
ILoveWindows
03-23-2021, 09:19 PM #4

It seems the issue is related to Valorant rather than the equipment.

E
eduardodd08
Posting Freak
852
03-24-2021, 01:11 PM
#5
I didn't disconnect anything, but I made sure everything stays intact.
E
eduardodd08
03-24-2021, 01:11 PM #5

I didn't disconnect anything, but I made sure everything stays intact.

A
AgantGB
Junior Member
38
03-24-2021, 03:56 PM
#6
It seems like the issue often occurs when I power down my PC, but the screens stay on while fans and RGB remain active.
A
AgantGB
03-24-2021, 03:56 PM #6

It seems like the issue often occurs when I power down my PC, but the screens stay on while fans and RGB remain active.

M
mccoop03
Posting Freak
910
03-30-2021, 03:49 AM
#7
Rtx 4090 7950x3d 32gb DDR5 5600mhz 2x16 Corsair Dominator Memory B650EF Strix 1300W Hydro FSP 80+Plat 980 Pro 1TB SSD Windows 11 Pro
M
mccoop03
03-30-2021, 03:49 AM #7

Rtx 4090 7950x3d 32gb DDR5 5600mhz 2x16 Corsair Dominator Memory B650EF Strix 1300W Hydro FSP 80+Plat 980 Pro 1TB SSD Windows 11 Pro

S
Smakna02
Member
64
03-30-2021, 04:44 AM
#8
Suggests a thermal paste problem—possibly dried out or uneven. Needs a consistency similar to paper-thin and razor-sharp. Avoid spillage anywhere, especially on the CPU. Possible causes: leftover cleaner or voltage issues from debris. Clean thoroughly with purified water, then mineral oil (not tap water), followed by isopropyl alcohol. Check for loose connectors. I’m confident the first two steps are the best approach.
S
Smakna02
03-30-2021, 04:44 AM #8

Suggests a thermal paste problem—possibly dried out or uneven. Needs a consistency similar to paper-thin and razor-sharp. Avoid spillage anywhere, especially on the CPU. Possible causes: leftover cleaner or voltage issues from debris. Clean thoroughly with purified water, then mineral oil (not tap water), followed by isopropyl alcohol. Check for loose connectors. I’m confident the first two steps are the best approach.

C
Chester007
Senior Member
528
04-02-2021, 03:02 AM
#9
Yes, when you open the start menu and choose "shutdown," the fans usually continue running and the screen stays illuminated.
C
Chester007
04-02-2021, 03:02 AM #9

Yes, when you open the start menu and choose "shutdown," the fans usually continue running and the screen stays illuminated.

Y
yolosolohi48
Member
167
04-02-2021, 08:07 AM
#10
Check the system stability across all categories for at least one hour using OCCT. Address any issues by performing a BIOS reset or updating the firmware. In the worst case, you may need to accept the problem.
Y
yolosolohi48
04-02-2021, 08:07 AM #10

Check the system stability across all categories for at least one hour using OCCT. Address any issues by performing a BIOS reset or updating the firmware. In the worst case, you may need to accept the problem.

Pages (2): 1 2 Next