F5F Stay Refreshed Hardware Desktop System halted while processing automatic repair settings.

System halted while processing automatic repair settings.

System halted while processing automatic repair settings.

Pages (2): Previous 1 2
M
MoneyMilhe
Member
Find
50
04-14-2020, 10:20 AM
#11
I checked every USB port on my PC and found it worked on my laptop.
Reply
Reply
M
MoneyMilhe
04-14-2020, 10:20 AM #11

I checked every USB port on my PC and found it worked on my laptop.

Reply
Reply
S
Serilium
Member
Find
183
04-14-2020, 02:22 PM
#12
It’s starting from the EFI drive, but Windows isn’t visible so it freezes. Press F8 through F12 (the bottom screen often shows which key opens the boot menu) right away during startup before reaching the BIOS. Make sure a USB drive is connected. This will display the boot menu where you can force the USB to start. Occasionally the BIOS doesn’t recognize the boot sequence.
Reply
Reply
S
Serilium
04-14-2020, 02:22 PM #12

It’s starting from the EFI drive, but Windows isn’t visible so it freezes. Press F8 through F12 (the bottom screen often shows which key opens the boot menu) right away during startup before reaching the BIOS. Make sure a USB drive is connected. This will display the boot menu where you can force the USB to start. Occasionally the BIOS doesn’t recognize the boot sequence.

Reply
Reply
T
TheJulloX
Junior Member
Find
11
04-22-2020, 03:40 AM
#13
I've attempted to start the system from the USB, but the problem persists.
Reply
Reply
T
TheJulloX
04-22-2020, 03:40 AM #13

I've attempted to start the system from the USB, but the problem persists.

Reply
Reply
J
jlien11
Senior Member
Find
253
04-22-2020, 05:22 AM
#14
OP lacks the RAM specifications, are we talking four DIMMs or two kits? Try placing one stick in DIMM A2 and check functionality.
Reply
Reply
J
jlien11
04-22-2020, 05:22 AM #14

OP lacks the RAM specifications, are we talking four DIMMs or two kits? Try placing one stick in DIMM A2 and check functionality.

Reply
Reply
P
pepecr123
Junior Member
Find
38
04-23-2020, 05:31 AM
#15
I possess a 2x8GB Trident Z RGB setup at 3200 CL16, but even when used separately it didn’t function properly.
Reply
Reply
P
pepecr123
04-23-2020, 05:31 AM #15

I possess a 2x8GB Trident Z RGB setup at 3200 CL16, but even when used separately it didn’t function properly.

Reply
Reply
T
Ts_CaSPeR
Junior Member
Find
4
04-24-2020, 09:38 PM
#16
Inspect every cable to confirm correct connections on both the motherboard and PSU. Open the UEFI settings and verify if CPU temperatures are within normal ranges; if they exceed typical limits (such as 90°C), assess cooling solutions or consider re-mounting the cooler. Gently reinsert the GPU if necessary. If issues persist, try reseating the CPU.
Reply
Reply
T
Ts_CaSPeR
04-24-2020, 09:38 PM #16

Inspect every cable to confirm correct connections on both the motherboard and PSU. Open the UEFI settings and verify if CPU temperatures are within normal ranges; if they exceed typical limits (such as 90°C), assess cooling solutions or consider re-mounting the cooler. Gently reinsert the GPU if necessary. If issues persist, try reseating the CPU.

Reply
Reply
H
How
Junior Member
Find
11
04-30-2020, 04:14 PM
#17
I've already tested them and they all worked fine, but they're still the same. I'm planning to reinstall the CPU tonight after I get home.
Reply
Reply
H
How
04-30-2020, 04:14 PM #17

I've already tested them and they all worked fine, but they're still the same. I'm planning to reinstall the CPU tonight after I get home.

Reply
Reply
Pages (2): Previous 1 2