F5F Stay Refreshed Hardware Desktop System frozen at peak speed.

System frozen at peak speed.

System frozen at peak speed.

Y
ySlownessG0D_
Junior Member
12
10-20-2016, 02:41 PM
#1
Y
ySlownessG0D_
10-20-2016, 02:41 PM #1

P
Periqito14YT
Junior Member
17
10-21-2016, 12:57 AM
#2
Switched to a balanced power plan.
P
Periqito14YT
10-21-2016, 12:57 AM #2

Switched to a balanced power plan.

X
Xanturvan
Member
161
10-21-2016, 02:34 AM
#3
It's currently set to a balanced state.
X
Xanturvan
10-21-2016, 02:34 AM #3

It's currently set to a balanced state.

M
MrLay
Junior Member
17
10-28-2016, 09:43 PM
#4
@Light034 - An Intel CPU is not designed to slow down if it has something to do. Check out your Task Manager Utilization data. There is a significant load on your CPU. It is definitely not idle. Maybe your NZXT monitoring software is loading your CPU way more than it should be. Click on the Details tab of the Task Manager and organize the running tasks by CPU usage. There must be something running on your computer, loading your CPU. Here is a 60 second scan on my laptop when it is idle with nothing open. Idle CPU Utilization should look like the EKG of a dead man.
M
MrLay
10-28-2016, 09:43 PM #4

@Light034 - An Intel CPU is not designed to slow down if it has something to do. Check out your Task Manager Utilization data. There is a significant load on your CPU. It is definitely not idle. Maybe your NZXT monitoring software is loading your CPU way more than it should be. Click on the Details tab of the Task Manager and organize the running tasks by CPU usage. There must be something running on your computer, loading your CPU. Here is a 60 second scan on my laptop when it is idle with nothing open. Idle CPU Utilization should look like the EKG of a dead man.

_
_zaphire_
Member
198
11-02-2016, 01:23 AM
#5
It's possible the bios update changed some of your default settings. I don't remember the exact setting, but there is a bios option that basically makes the cpu run at full even if it's idle. It has to do with intel's P-state and C-state settings. You'll have to search through the bios to find it and change it.
_
_zaphire_
11-02-2016, 01:23 AM #5

It's possible the bios update changed some of your default settings. I don't remember the exact setting, but there is a bios option that basically makes the cpu run at full even if it's idle. It has to do with intel's P-state and C-state settings. You'll have to search through the bios to find it and change it.

S
sg2010
Junior Member
34
11-07-2016, 05:41 AM
#6
You didn't make any specific changes to the BIOS, but it resolved itself after restarting. It seems the problem might have been related to internal graphics being enabled, causing the CPU to run at full speed. You also adjusted some settings from Auto to Enabled, though I'm not entirely sure what caused the issue. In short, updating the BIOS can be quite challenging.
S
sg2010
11-07-2016, 05:41 AM #6

You didn't make any specific changes to the BIOS, but it resolved itself after restarting. It seems the problem might have been related to internal graphics being enabled, causing the CPU to run at full speed. You also adjusted some settings from Auto to Enabled, though I'm not entirely sure what caused the issue. In short, updating the BIOS can be quite challenging.

N
nevzatie1
Junior Member
2
11-08-2016, 01:03 AM
#7
I adjusted the BIOS on your B550M-A (Wifi) Mobo recently and the same issue persists. The CPU remains stuck at 4.3 Ghz despite no activity. I’m unsure about power usage, but the nearby NVMe SSD is getting hot. My main concern is potential long-term damage to the CPU.
N
nevzatie1
11-08-2016, 01:03 AM #7

I adjusted the BIOS on your B550M-A (Wifi) Mobo recently and the same issue persists. The CPU remains stuck at 4.3 Ghz despite no activity. I’m unsure about power usage, but the nearby NVMe SSD is getting hot. My main concern is potential long-term damage to the CPU.

M
MaceyMarmalade
Junior Member
13
11-08-2016, 02:30 AM
#8
Identify the C-states and set them for enable or auto mode.
M
MaceyMarmalade
11-08-2016, 02:30 AM #8

Identify the C-states and set them for enable or auto mode.