F5F Stay Refreshed Hardware Desktop System frozen at 0.79 GHz frequency.

System frozen at 0.79 GHz frequency.

System frozen at 0.79 GHz frequency.

Pages (2): 1 2 Next
J
Jomppaboy
Member
192
12-07-2016, 09:36 PM
#1
You're experiencing CPU throttling, specifically from EDP OTHER. It's frustrating when performance drops unexpectedly. Let me know if you need guidance on troubleshooting or solutions. Thanks for reaching out!
J
Jomppaboy
12-07-2016, 09:36 PM #1

You're experiencing CPU throttling, specifically from EDP OTHER. It's frustrating when performance drops unexpectedly. Let me know if you need guidance on troubleshooting or solutions. Thanks for reaching out!

D
DangoBravo
Posting Freak
821
12-17-2016, 12:05 PM
#2
Your processor is not running, which is typical for an idle state at 800MHz.
D
DangoBravo
12-17-2016, 12:05 PM #2

Your processor is not running, which is typical for an idle state at 800MHz.

N
Noblecookie
Member
99
12-25-2016, 06:31 AM
#3
However, the usage stays under 22% and the frequency doesn't exceed 0.79 GHz regardless of whether I launch a game or another program.
N
Noblecookie
12-25-2016, 06:31 AM #3

However, the usage stays under 22% and the frequency doesn't exceed 0.79 GHz regardless of whether I launch a game or another program.

S
SillyDragon
Senior Member
586
12-25-2016, 09:20 AM
#4
utilization remains unchanged with frequency changes; using 22% of 800MHz is similar to about 4% at full speed. Also, are you experiencing performance problems, or did you simply observe 800MHz as an issue?
S
SillyDragon
12-25-2016, 09:20 AM #4

utilization remains unchanged with frequency changes; using 22% of 800MHz is similar to about 4% at full speed. Also, are you experiencing performance problems, or did you simply observe 800MHz as an issue?

C
ChikolandZ
Member
124
12-25-2016, 11:30 AM
#5
I attempted to operate the computer today, and everything seemed slower than usual. After turning it off and on again, I still noticed delays when loading items.
C
ChikolandZ
12-25-2016, 11:30 AM #5

I attempted to operate the computer today, and everything seemed slower than usual. After turning it off and on again, I still noticed delays when loading items.

Z
zebragirlC
Member
115
12-26-2016, 05:00 PM
#6
Your maximum package power is indeed limited to 5W. This restriction applies to the CPU and is normal for desktop systems. Have you updated your BIOS recently?
Z
zebragirlC
12-26-2016, 05:00 PM #6

Your maximum package power is indeed limited to 5W. This restriction applies to the CPU and is normal for desktop systems. Have you updated your BIOS recently?

_
_NeoBl0X_
Senior Member
635
12-26-2016, 07:29 PM
#7
I attempted to modify certain settings in the bios, yet nothing beyond what was already present could be altered.
_
_NeoBl0X_
12-26-2016, 07:29 PM #7

I attempted to modify certain settings in the bios, yet nothing beyond what was already present could be altered.

G
guru_omai
Junior Member
7
12-26-2016, 09:08 PM
#8
You can try adjusting your system settings to boost CPU performance, such as increasing processor priority or tweaking power management options. Check if your current configurations are optimal for your workload; if not, resetting them might help restore better performance.
G
guru_omai
12-26-2016, 09:08 PM #8

You can try adjusting your system settings to boost CPU performance, such as increasing processor priority or tweaking power management options. Check if your current configurations are optimal for your workload; if not, resetting them might help restore better performance.

B
Beavz
Member
208
01-11-2017, 04:08 AM
#9
The configuration you see doesn’t seem likely to trigger this issue, but if you’re not sure what could be causing it, a good first step is to perform a Factory Reset of the BIOS. Remember, after resetting, you’ll need to re-enable XMP. Could you tell me which motherboard you’re using?
B
Beavz
01-11-2017, 04:08 AM #9

The configuration you see doesn’t seem likely to trigger this issue, but if you’re not sure what could be causing it, a good first step is to perform a Factory Reset of the BIOS. Remember, after resetting, you’ll need to re-enable XMP. Could you tell me which motherboard you’re using?

P
Pedro_Costa01
Member
68
01-11-2017, 07:13 PM
#10
My ASUS ROG Z-390F board is ready for use.
P
Pedro_Costa01
01-11-2017, 07:13 PM #10

My ASUS ROG Z-390F board is ready for use.

Pages (2): 1 2 Next