System freezes after installing 32GB RAM at 3600MHz from a previous 16GB at 3000MHz.
System freezes after installing 32GB RAM at 3600MHz from a previous 16GB at 3000MHz.
Well, this could be a bit tricky... It's Micron B-die, but it should work eventually. I'd go with that configuration. Try XMP #10 at 16.0-20.0-20.0-38-57 MHz and 1600 MHz (1.350 V). If it passes the stability test, adjust to 16-18-18-36-56 and retry. If the profile isn't found, turn on XMP and set the timing and voltage manually.
Your storage capacity is what? Likely the Samsung A-Die 10nm. It seems to outperform the Micron B-die 18-18-18 options. Generally, those struggling with multiple drives often deal with SK Hynix modules.
I changed my slot configuration from 1+3 to 2+4 and remain optimistic about the outcome. I observed in the XMP profile through BIOS that the slot numbers shifted—1+3 displayed 1.39v while 2+4 now shows 1.35v for the 3600MHz, matching the reading from last night. This observation intrigues me, and I’m curious about the reason behind it. I plan to test further and share my findings. Additionally, I discovered this information today on GIGABYTE, which recommends installing the modules into DDR4_A2 and DDR4_B2 for optimal compatibility.