System failure detected. Lights indicating issues are active.
System failure detected. Lights indicating issues are active.
Sure, I get it—everything seems off. It’s strange there are still all the debug lights active. That’s probably the most confusing part. If it were just one issue, we’d have something concrete to work with. And honestly, I didn’t realize that before—I didn’t even use a single stick of RAM on purpose.
I checked the information online, but there’s no record of several LEDs being on. That’s unusual. Based on the options, resetting the CMOS seems like the best choice. Have you tried that? You could also follow the detailed instructions on the ASUS website or consider replacing the motherboard since it appears to be faulty.
All lights are functioning except for the DRAM. When attempting to boot without any RAM, only the DRAM indicator appears. After resetting the CMOS and re-flashing the BIOS, the same three LEDs appear again. Many users on forums have suggested my motherboard might be faulty. I expect a Z790 in a few days, which should work with my i7-13700KF right out of the box. I’m hoping the problem doesn’t continue so I can return my Z690.
It looks like everything seems fine with your setup. I’d suggest resetting the CMOS one more time just to be sure. After flashing the BIOS, what happens next depends on the process—just in case you missed it, you might want to try the flashback again. Wait about ten minutes, disconnect the USB, then power it back on.
I tried that too but didn’t get results. But I purchased a Z790 and followed the setup steps identically—it functioned perfectly and I now have my finished project. Probably the original motherboard was problematic from the start.
I purchased a z790 and followed the same steps; it functioned flawlessly. I plan to return my z690.