Switching from N to AC protocol?
Switching from N to AC protocol?
Hello. Your Asus PCE-AC56 PCIe card only shows an N (2.4Gbps) connection, which limits your speeds. The driver downloads keep disconnecting and reconnecting, so you can only use it when plugged in directly. It seems the AC compatibility is working on your motherboard (Rog-Strix Z490-F), but you might have installed it incorrectly. Check the PCIe slot and ensure it matches the correct type for this card.
Confirming the details: connecting on 5GHz displays an AC status, while 2.4GHz shows a N status. This aligns with the information, as AC improvements are limited to the 5GHz range. All AC devices operate under N standards on 2.4GHz. Wi-Fi 6 will enhance both bands.
Hello. I've switched back to the N connection, but it seems to be quite unstable. Can you find a method to ensure it stays connected to the AC permanently?
I don't have a single SSID for both bands. Each band typically has its own name, such as "Name" for 2.4GHz and "Name-5" for 5GHz.
802.11a differs from 802.11ac in several ways. Both operate on the 5GHz band, but 802.11a is limited to 54Mbps, similar to 802.11b. They’re both relatively outdated technology. To ensure your devices connect to your WiFi 5 signal, restrict them to N/AC or AC settings in your router’s radio configuration.