Stuck on bios after switching the PSU, help me!

Pages (2): 1 2 Next

_Ace_Plays
Member

02-05-2025, 12:12 PM

recently i upgraded my psu from 500 w to 750 w but i was experiencing a blue screen with my older one. after installing the new psu, i got stuck in bios and my system ssd m.2 isn't showing. i tried the old psu and it worked fine, so i'm not sure what's wrong now.

_Ace_Plays

02-05-2025, 12:12 PM #1

jaytjehXD
Member

02-05-2025, 12:46 PM

What is the brand and model of these PSUs? Did you reuse an old PSU cable?

jaytjehXD

02-05-2025, 12:46 PM #2

What is the brand and model of these PSUs? Did you reuse an old PSU cable?

EmilyLee13
Member

02-05-2025, 09:12 PM

old psu raidmax 500 w
new psu msi mag a750 bn

EmilyLee13

02-05-2025, 09:12 PM #3

old psu raidmax 500 w
new psu msi mag a750 bn

_DeathTrap_
Member

212

02-06-2025, 02:38 AM

I installed the latest cable for the new PSU.

_DeathTrap_

02-06-2025, 02:38 AM #4

I installed the latest cable for the new PSU.

DannyTDM
Junior Member

02-06-2025, 07:18 AM

Reset motherboard BIOS!

DannyTDM

02-06-2025, 07:18 AM #5

Reset motherboard BIOS!

jaayk
Member

123

02-07-2025, 06:43 PM

I removed the CMOS battery and got the same outcome.

jaayk

02-07-2025, 06:43 PM #6

I removed the CMOS battery and got the same outcome.

Daantjeplays
Member

157

02-07-2025, 09:11 PM

That's not quite a CMOS clear. You will need to short two pins on your mobo for the CMOS to take effect.
Before any other answers, what is your full PC spec? CPU/Mobo/Ram/GPU etc. We're only guessing without that.

Daantjeplays

02-07-2025, 09:11 PM #7

WoofWoofRun
Member

02-07-2025, 09:39 PM

cpu model r5 5600g
gpu rtx 3060 gb galax
ram 16 gb (8×2) 3200 mhz xpg
mobo asus prime b550m_k
ssd m.2 xpg 256 gb
psu msi mag a 750 bn

WoofWoofRun

02-07-2025, 09:39 PM #8

cpu model r5 5600g
gpu rtx 3060 gb galax
ram 16 gb (8×2) 3200 mhz xpg
mobo asus prime b550m_k
ssd m.2 xpg 256 gb
psu msi mag a 750 bn

Goldy408
Member

02-11-2025, 05:07 AM

Ideally, you should be using 3607 BIOS for your motherboard. You can verify the bios you have by running CPU-z and checking the mainboard section.

Goldy408

02-11-2025, 05:07 AM #9

Ideally, you should be using 3607 BIOS for your motherboard. You can verify the bios you have by running CPU-z and checking the mainboard section.

ethan04108
Junior Member

02-11-2025, 05:53 AM

#10

I updated my bios to the latest version from the official Asus website. I'll clear the CMOS and let you know once done.

ethan04108

02-11-2025, 05:53 AM #10

I updated my bios to the latest version from the official Asus website. I'll clear the CMOS and let you know once done.

Pages (2): 1 2 Next