Struggling to achieve optimal RAM performance? Check your setup, update drivers, and ensure proper cooling.

F5F Stay Refreshed Hardware Desktop Struggling to achieve optimal RAM performance? Check your setup, update drivers, and ensure proper cooling.

Pages (2): 1 2 Next

applez13
Member

138

12-14-2019, 03:28 AM

I currently own a 3600x, Asrock B450 steel Legend with 16GB of Patriot Viper 3600mhz RAM. Despite everything running smoothly, I'm struggling to maintain speeds above 2133MHz. The system functions perfectly normally, but adjusting settings like XMP profiles or manually tweaking voltage and speed causes the PC to loop during boot and reset the motherboard upon shutdown or restart. My knowledge of RAM overclocking is limited, so any advice would be greatly appreciated.

applez13

12-14-2019, 03:28 AM #1

Addycassy
Junior Member

12-14-2019, 07:44 AM

Alright a couple of things Clear the cmos Update the bios Set the soc to 1.1 Dram to 1.35 Try 3200 and check if it works by using memtest86 and OCCT Then try 3600 Good luck

Addycassy

12-14-2019, 07:44 AM #2

Alright a couple of things Clear the cmos Update the bios Set the soc to 1.1 Dram to 1.35 Try 3200 and check if it works by using memtest86 and OCCT Then try 3600 Good luck

Nero12321
Posting Freak

858

12-15-2019, 12:00 PM

Unfortunately, nothing has helped Sad

. Even with the Ryzen Drm calculator and manually entering all settings didn't resolve the issue.

Nero12321

12-15-2019, 12:00 PM #3

Unfortunately, nothing has helped Sad . Even with the Ryzen Drm calculator and manually entering all settings didn't resolve the issue.

stefjar9
Member

12-16-2019, 04:47 PM

None of the steps you tried succeeded? Have you attempted 3200 with soc at 1.1, dram at 1.35, followed by memtest86 and OCCT?

stefjar9

12-16-2019, 04:47 PM #4

None of the steps you tried succeeded? Have you attempted 3200 with soc at 1.1, dram at 1.35, followed by memtest86 and OCCT?

Figalhutch
Member

12-16-2019, 06:22 PM

Yep, I handle it all. Click save changes and exit, then the system switches off briefly for roughly two seconds, repeats this a few times, and restarts normally. After that, it boots into Windows and everything returns to its standard configuration. With the default RAM speed at 2133MHz, everything functions properly.