F5F Stay Refreshed Hardware Desktop SSD installation fails to appear in Mobo setup tool

SSD installation fails to appear in Mobo setup tool

SSD installation fails to appear in Mobo setup tool

L
LilStege
Member
205
04-01-2020, 06:54 PM
#1
I replaced my 1TB Samsung drive with a 2TB WD Black SSD (SN850X) in an M.2 slot. Before installing, I copied game files from the old drive to the new one inside the enclosure. After swapping drives, the WD did not appear in the file explorer. The Samsung drive showed up correctly once reinstalled and again when placed in the enclosure. To make the WD appear on your motherboard, try reinstalling it carefully and ensure proper BIOS settings. Your MSI MAG B550 Tomahawk Max should work with this setup.
L
LilStege
04-01-2020, 06:54 PM #1

I replaced my 1TB Samsung drive with a 2TB WD Black SSD (SN850X) in an M.2 slot. Before installing, I copied game files from the old drive to the new one inside the enclosure. After swapping drives, the WD did not appear in the file explorer. The Samsung drive showed up correctly once reinstalled and again when placed in the enclosure. To make the WD appear on your motherboard, try reinstalling it carefully and ensure proper BIOS settings. Your MSI MAG B550 Tomahawk Max should work with this setup.

J
JordanFFA
Junior Member
38
04-02-2020, 02:22 AM
#2
Have you set up the disk in Disk Management? (Select the Start button, then choose Disk Management)
J
JordanFFA
04-02-2020, 02:22 AM #2

Have you set up the disk in Disk Management? (Select the Start button, then choose Disk Management)

S
stormstar200
Member
67
04-03-2020, 06:08 PM
#3
I handled the issue by troubleshooting with another person. It turned out my Slot 2 isn’t compatible with Gen 4 media. I swapped my boot drive into Slot 2 and my new drive into Slot 1, which is Gen 4 compatible. I assumed Gen 4 drives would still fit in Gen 3 slots, but it seems they don’t.
S
stormstar200
04-03-2020, 06:08 PM #3

I handled the issue by troubleshooting with another person. It turned out my Slot 2 isn’t compatible with Gen 4 media. I swapped my boot drive into Slot 2 and my new drive into Slot 1, which is Gen 4 compatible. I assumed Gen 4 drives would still fit in Gen 3 slots, but it seems they don’t.

N
nooneepic27
Member
227
04-09-2020, 01:23 PM
#4
Gen 4 drives need backward compatibility. Perhaps this port is turned off if other SATA or PCIe connections are active.
N
nooneepic27
04-09-2020, 01:23 PM #4

Gen 4 drives need backward compatibility. Perhaps this port is turned off if other SATA or PCIe connections are active.

R
RafikiBoy
Member
103
04-09-2020, 03:22 PM
#5
It seems having something in slot 3 blocks the secondary M.2 port.
R
RafikiBoy
04-09-2020, 03:22 PM #5

It seems having something in slot 3 blocks the secondary M.2 port.

F
FraanBoisse
Junior Member
48
04-09-2020, 06:23 PM
#6
No, the GPU slot is not 3.
F
FraanBoisse
04-09-2020, 06:23 PM #6

No, the GPU slot is not 3.

T
timbay
Junior Member
13
04-09-2020, 07:13 PM
#7
The GPU must be placed in the main top position, slot number one, with silver positioned just beneath the primary M.2 slot. Slot three, located further down the board, serves as the additional full-length slot.
T
timbay
04-09-2020, 07:13 PM #7

The GPU must be placed in the main top position, slot number one, with silver positioned just beneath the primary M.2 slot. Slot three, located further down the board, serves as the additional full-length slot.

S
Skyrocker
Member
55
04-10-2020, 02:09 AM
#8
You have two M.2 slots—one with Gen 4 and another with Gen 3—and no space left in the larger full-length slot. Only your GPU is installed in the main full-length drive.
S
Skyrocker
04-10-2020, 02:09 AM #8

You have two M.2 slots—one with Gen 4 and another with Gen 3—and no space left in the larger full-length slot. Only your GPU is installed in the main full-length drive.