SSD

Pages (2): 1 2 Next

mjt2789
Senior Member

483

01-26-2026, 04:21 PM

You recently cloned your HDD to an SSD, updated the BIOS for booting, but after clicking "save and exit," it fails to start. Restarting didn’t help. Here’s some guidance: check connections, ensure the SSD is properly recognized, verify BIOS settings, and try a clean boot.

mjt2789

01-26-2026, 04:21 PM #1

BHLxNJx
Posting Freak

881

02-01-2026, 10:54 PM

Sure, here are the complete system specifications.

BHLxNJx

02-01-2026, 10:54 PM #2

Sure, here are the complete system specifications.

horselover328
Member

148

02-19-2026, 01:07 AM

Ryzen 5 5600 paired with Radeon 5600 XT, two storage options—one 1TB HDD and another 240GB SSD. Equipped with a 2x8 RAM module and an A320M-HDV motherboard powered by a 600W PSU.

horselover328

02-19-2026, 01:07 AM #3

Ryzen 5 5600 paired with Radeon 5600 XT, two storage options—one 1TB HDD and another 240GB SSD. Equipped with a 2x8 RAM module and an A320M-HDV motherboard powered by a 600W PSU.

EisTeeKlaus
Senior Member

490

02-19-2026, 01:33 AM

The PC was operational before the clone was created.

EisTeeKlaus

02-19-2026, 01:33 AM #4

The PC was operational before the clone was created.

Papa_4ndy
Junior Member

02-20-2026, 12:39 AM

They didn’t mention any other changes to the system.

Papa_4ndy

02-20-2026, 12:39 AM #5

They didn’t mention any other changes to the system.

bluebananaa
Junior Member

02-20-2026, 12:46 AM

Moved to Troubleshooting section

bluebananaa

02-20-2026, 12:46 AM #6

Moved to Troubleshooting section

Rodri_Mendes
Member

223

02-21-2026, 04:46 PM

You checked if the BIOS was updated prior to cloning the drive. You attempted to reset the CMOS and encountered issues afterward.

Rodri_Mendes

02-21-2026, 04:46 PM #7

You checked if the BIOS was updated prior to cloning the drive. You attempted to reset the CMOS and encountered issues afterward.

Elementul
Member

02-21-2026, 06:12 PM

The program started successfully but caused the computer to crash upon launching.

Elementul

02-21-2026, 06:12 PM #8

The program started successfully but caused the computer to crash upon launching.

MiguelZipfel
Junior Member

02-22-2026, 04:12 AM

I'm using a standard power supply.

MiguelZipfel

02-22-2026, 04:12 AM #9

I'm using a standard power supply.

Mike_08
Member

160

02-22-2026, 02:11 PM

#10

I purchased a 750-watt Corsair for a 600-watt setup on eBay, which will take some time. I’ll also need to replace my motherboard soon.

Mike_08

02-22-2026, 02:11 PM #10

I purchased a 750-watt Corsair for a 600-watt setup on eBay, which will take some time. I’ll also need to replace my motherboard soon.

Pages (2): 1 2 Next