Sorry about the wrong forum, but I'm here to assist you. Please let me know what you need help with.

F5F Stay Refreshed Hardware Desktop Sorry about the wrong forum, but I'm here to assist you. Please let me know what you need help with.

alexbaab
Junior Member

05-28-2023, 01:40 AM

I was ready to connect the controller to my PC, but when I removed and reinserted the USB it stopped working. After checking the port, it seemed damaged. Could you offer some advice on how to resolve this issue?

alexbaab

05-28-2023, 01:40 AM #1

NrSix
Member

06-04-2023, 01:14 PM

You’ll likely require a tiny instrument to reshape each pin, such as a dental tool or toothpick. In the worst case, the connection point might be completely damaged.

NrSix

06-04-2023, 01:14 PM #2

You’ll likely require a tiny instrument to reshape each pin, such as a dental tool or toothpick. In the worst case, the connection point might be completely damaged.

Audd11
Junior Member

06-04-2023, 02:12 PM

The computer is not starting and it seems the USB connection failed, making the PC inaccessible.

Audd11

06-04-2023, 02:12 PM #3

The computer is not starting and it seems the USB connection failed, making the PC inaccessible.

Fred_Da_Walrus
Junior Member

06-09-2023, 09:22 AM

Disconnect the internal USB connector

Fred_Da_Walrus

06-09-2023, 09:22 AM #4

Disconnect the internal USB connector

AlixHasan
Junior Member

06-09-2023, 09:27 AM

Avoid hitting the USB port in the dark or pushing it in forcefully. It seems this isn't its first encounter.

AlixHasan

06-09-2023, 09:27 AM #5

Avoid hitting the USB port in the dark or pushing it in forcefully. It seems this isn't its first encounter.

PersieO
Posting Freak

786

06-10-2023, 01:14 AM

Disconnect the header or remove the pins using side cutters. Likely everything is okay; part of the USB protocol from the 1.1 era requires power/data shorts to ground to trigger shutdown.

PersieO

06-10-2023, 01:14 AM #6

Disconnect the header or remove the pins using side cutters. Likely everything is okay; part of the USB protocol from the 1.1 era requires power/data shorts to ground to trigger shutdown.