Slightly warped motherboard

12-11-2023, 12:05 PM

Your motherboard has a slight bend at the end. It's probably okay to monitor it, but if it continues to affect performance, consider checking it out.

Greenmonstas

12-11-2023, 12:05 PM #1

Your motherboard has a slight bend at the end. It's probably okay to monitor it, but if it continues to affect performance, consider checking it out.

pedro_tkf
Senior Member

643

12-13-2023, 12:43 AM

The bend is located where you need it, but if it functions properly, don't make any changes.

pedro_tkf

12-13-2023, 12:43 AM #2

The bend is located where you need it, but if it functions properly, don't make any changes.

baccaleptic
Junior Member

12-13-2023, 12:06 PM

THIS

baccaleptic

12-13-2023, 12:06 PM #3

THIS

Krampuss
Junior Member

12-15-2023, 04:45 PM

without any motherboard standoffs on the back, you should remove the board and install it. if there are standoffs present, don’t worry as long as your system remains safe from shorts.

Krampuss

12-15-2023, 04:45 PM #4

without any motherboard standoffs on the back, you should remove the board and install it. if there are standoffs present, don’t worry as long as your system remains safe from shorts.

IIlIlIIllIlI
Member

12-22-2023, 03:53 AM

functionality operates smoothly with compatibility for RAM slots and a 24-pin connector, suitable for motherboard installation in the corner area.

IIlIlIIllIlI

12-22-2023, 03:53 AM #5

functionality operates smoothly with compatibility for RAM slots and a 24-pin connector, suitable for motherboard installation in the corner area.

GekkeSchildpad
Member

211

12-24-2023, 05:06 PM

It functions properly and doesn't cause short selling.

GekkeSchildpad

12-24-2023, 05:06 PM #6

It functions properly and doesn't cause short selling.

D3LTADRAGONITE
Junior Member

12-25-2023, 05:09 PM

So then if it wasn't you, everyone seems fine, my old computer had a slight bend, yet everything functioned perfectly.

D3LTADRAGONITE

12-25-2023, 05:09 PM #7

So then if it wasn't you, everyone seems fine, my old computer had a slight bend, yet everything functioned perfectly.

KoncubineKate
Member

12-26-2023, 01:59 AM

every part is functioning properly and I haven’t seen the system crash on its own, though I’ve only used it for a week.

KoncubineKate

12-26-2023, 01:59 AM #8

every part is functioning properly and I haven’t seen the system crash on its own, though I’ve only used it for a week.

zeras4
Junior Member

12-26-2023, 06:34 PM

If it stops unexpectedly, I’d remove the motherboard to check for any damage.

zeras4

12-26-2023, 06:34 PM #9

If it stops unexpectedly, I’d remove the motherboard to check for any damage.