Single core score refers to a measurement from one processor core.
Single core score refers to a measurement from one processor core.
For trading stocks, this aligns with what I anticipate for around R20. Overclocked units, such as those you'd use with a 10900X, are quite poor—expect the chip to run closer to 4.5–4.8GHz, depending on your motherboard, CPU quality, and cooling solution.
I went beyond the default settings to 4.9, but the results show 3.7. Maybe Cinebench runs with the standard CPU speed instead.
Are you sure? That's about where the CPU should be scoring when it's at 3.7GHz, not 4.9GHz. Use something like HWiNFO64 to make sure that the chip is actually running at 4.9GHz, because I'm 95% sure it's not. EDIT: Don't worry about where it says "@ 3.7 GHz", it's a pretty common bug with Cinebench, it doesn't read CPU frequency correct half the time. The score itself is the reason why I say it's running at 3.7GHz. Edited April 15, 2022 by RONOTHAN##
It seems RAM will slightly affect performance, though I haven't tested single-channel setups—only dual and quad. I don’t expect it to be extremely fast on a single core; mesh chips might lag compared to ringbus versions, but they perform better under multicore tasks. At least when looking at the 6950X and 7900X comparisons, you should see higher speeds than the stock 7700K thanks to its clock lead advantage.
Open HWiNFO and select "Sensors only." A dropdown will appear with options like "CPU Frequency," displaying the current clock speed. Running the R23 will let you observe the actual performance, which often decreases to around 4GHz or less due to thermal throttling or AVX limitations.
My AVX offset is adjusted due to elevated CPU temperatures during intense usage.
I'm using XTU and notice certain bios features are disabled. The CPU speed only decreases when I run Prime 95, possibly due to AVX512 support. Overall, it stays around version 4.9 except during that update.