F5F Stay Refreshed Hardware Desktop Share your motherboard details online.

Share your motherboard details online.

Share your motherboard details online.

M
MavrosGR
Senior Member
579
10-08-2023, 09:04 AM
#1
I’ve left my old motherboard, CPU, and fan on eBay, wondering if it was a bad move. It’s tricky to wrap everything up because the fan is still attached and the fan is large. I’m unsure what to put inside the box to protect it properly.
M
MavrosGR
10-08-2023, 09:04 AM #1

I’ve left my old motherboard, CPU, and fan on eBay, wondering if it was a bad move. It’s tricky to wrap everything up because the fan is still attached and the fan is large. I’m unsure what to put inside the box to protect it properly.

S
SpiritClaws
Member
217
10-08-2023, 01:13 PM
#2
It’s simple to reinstall the fan if needed.
S
SpiritClaws
10-08-2023, 01:13 PM #2

It’s simple to reinstall the fan if needed.

D
Designx
Member
219
10-08-2023, 03:37 PM
#3
The Arctic Freezer Pro Rev 2 Cooler has a screwless design, so you won’t need to unscrew anything. If you were to remove the motherboard, you’d likely use protective packaging such as foam inserts or padded boxes to prevent damage during transport.
D
Designx
10-08-2023, 03:37 PM #3

The Arctic Freezer Pro Rev 2 Cooler has a screwless design, so you won’t need to unscrew anything. If you were to remove the motherboard, you’d likely use protective packaging such as foam inserts or padded boxes to prevent damage during transport.

E
EmmyG123
Member
142
10-09-2023, 01:32 PM
#4
The fan is linked to the CPU and paste zone, making it impossible to take it off.
E
EmmyG123
10-09-2023, 01:32 PM #4

The fan is linked to the CPU and paste zone, making it impossible to take it off.

C
Create_Miner
Junior Member
24
10-10-2023, 08:37 AM
#5
You can do it. There are some YouTube clips showing how the unit was installed, just go backward. Usually you take out the fans, undo the screws, and lift the cooler—give it a slight twist while pulling it off can be useful if the thermal paste is securing it.
C
Create_Miner
10-10-2023, 08:37 AM #5

You can do it. There are some YouTube clips showing how the unit was installed, just go backward. Usually you take out the fans, undo the screws, and lift the cooler—give it a slight twist while pulling it off can be useful if the thermal paste is securing it.