Set up a dual operating system with Linux and Windows side by side.
Set up a dual operating system with Linux and Windows side by side.
Checking for a method to start Linux before Windows, especially when the setup doesn’t allow switching back, is common. You might need to adjust your installation steps or use specific tools to enable dual booting correctly.
You can try, but you need to work with Grub. The best approach is to start with Windows first. Why are you interested in this?
I would set up Windows first since it would simplify forming a Linux partition
Grub is the standard Linux startup program. It can be adjusted using configuration files. Check the Arch Wiki for details. The MBR determines which drives start up. A tiny partition contains a bootloader that guides the system on loading the kernel and identifying its location. You must have Grub active at the MBR level to enable dual booting of Linux. If you already have Linux installed, installing Windows can cause Windows to override Grub with its own bootloader.
Start your Linux session from the CD and navigate to the desktop using the live environment. Prepare the disk for Linux by creating an ext4 filesystem with a swap area, leaving enough space for Windows. Allocate the remaining space for Windows, which will use NTFS. Begin installation of Linux. Restart the system. Insert the bootable USB or DVD containing Windows and install Windows on the unused partitions. Launch Windows from the boot device and enter the Linux installation media again using "try without installing." Access the terminal and run lsblk to identify the Linux partition (e.g., /dev/sda1). If Linux is installed, mount it at /mnt, update GRUB, install the GRUB image for your disk, then unmount the mounted volume. Reboot. Insert the Windows USB/DVD into the boot device and begin the installation process. After completion, locate the Linux partition in the mounted filesystem and, if needed, use EasyBCD to restore it (search online for guidance).