F5F Stay Refreshed Hardware Desktop Select the appropriate RAM based on your needs and system compatibility.

Select the appropriate RAM based on your needs and system compatibility.

Select the appropriate RAM based on your needs and system compatibility.

Pages (2): 1 2 Next
R
Rosario17_
Posting Freak
897
11-02-2018, 11:29 AM
#1
You're considering RAM for your Ryzen 5 2600 on an MSI B450 Bazooka Plus motherboard. The Delta TUF model offers a lifetime warranty, which might be worth the extra ~$20 compared to other options. It's a solid choice if reliability is important for you.
R
Rosario17_
11-02-2018, 11:29 AM #1

You're considering RAM for your Ryzen 5 2600 on an MSI B450 Bazooka Plus motherboard. The Delta TUF model offers a lifetime warranty, which might be worth the extra ~$20 compared to other options. It's a solid choice if reliability is important for you.

D
DarkStains
Member
149
11-09-2018, 12:00 PM
#2
Results remain fairly consistent across RAM makers, provided the performance level stays the same. Choose the fastest option available, ensuring it comes from a trusted source with no major reported problems.
D
DarkStains
11-09-2018, 12:00 PM #2

Results remain fairly consistent across RAM makers, provided the performance level stays the same. Choose the fastest option available, ensuring it comes from a trusted source with no major reported problems.

G
guldzin
Junior Member
6
11-09-2018, 09:56 PM
#3
The 3600MHz option is indeed the quickest, but the higher CL timing could still matter depending on your setup.
G
guldzin
11-09-2018, 09:56 PM #3

The 3600MHz option is indeed the quickest, but the higher CL timing could still matter depending on your setup.

W
Way2Meke
Member
235
11-09-2018, 11:51 PM
#4
Yes, your assessment seems accurate. The comparison between 3200 CL16 and 3600 CL18 appears to be roughly balanced in performance.
W
Way2Meke
11-09-2018, 11:51 PM #4

Yes, your assessment seems accurate. The comparison between 3200 CL16 and 3600 CL18 appears to be roughly balanced in performance.

W
Wu_xj
Junior Member
40
11-10-2018, 01:29 AM
#5
Checked the results—both seem identical. Overclocking the 3200 or the 3600 appears to yield the same outcome.
W
Wu_xj
11-10-2018, 01:29 AM #5

Checked the results—both seem identical. Overclocking the 3200 or the 3600 appears to yield the same outcome.

S
SkyeeLine
Junior Member
18
11-10-2018, 09:55 AM
#6
The numbers above 2666 are already boosted. You might try adjusting the clock speeds manually, though it’s not very straightforward and the improvement won’t be significant. For maximum power extraction, you can opt for higher settings like 3600 CL16, but gains here are only around 0.5 to 1%.
S
SkyeeLine
11-10-2018, 09:55 AM #6

The numbers above 2666 are already boosted. You might try adjusting the clock speeds manually, though it’s not very straightforward and the improvement won’t be significant. For maximum power extraction, you can opt for higher settings like 3600 CL16, but gains here are only around 0.5 to 1%.

M
m0m0lepr0
Junior Member
10
11-15-2018, 08:26 AM
#7
Yea was aiming to boost frequencies further. What options are available? PNY 3200MHz CL16 costs around 86.57USD, Klevv Cras X3600MHz is about 88.91USD, and Delta TUF 3200CL16 is listed at 106.25USD.
M
m0m0lepr0
11-15-2018, 08:26 AM #7

Yea was aiming to boost frequencies further. What options are available? PNY 3200MHz CL16 costs around 86.57USD, Klevv Cras X3600MHz is about 88.91USD, and Delta TUF 3200CL16 is listed at 106.25USD.

I
ImEternity
Junior Member
45
11-19-2018, 08:43 AM
#8
I’d choose the 3600MHz model since, in my experience, manual overclocking usually works best with faster clock speeds rather than narrower timings.
I
ImEternity
11-19-2018, 08:43 AM #8

I’d choose the 3600MHz model since, in my experience, manual overclocking usually works best with faster clock speeds rather than narrower timings.

B
Beastboomer1
Member
169
11-21-2018, 09:36 AM
#9
It suggests the system can handle speeds beyond 3333MHz if supported, but exceeding it might affect stability.
B
Beastboomer1
11-21-2018, 09:36 AM #9

It suggests the system can handle speeds beyond 3333MHz if supported, but exceeding it might affect stability.

M
miner3378
Member
248
11-28-2018, 05:22 PM
#10
This indicates that exceeding 3333mhz is essentially an overclocking action.
M
miner3378
11-28-2018, 05:22 PM #10

This indicates that exceeding 3333mhz is essentially an overclocking action.

Pages (2): 1 2 Next