F5F Stay Refreshed Power Users Networks Secure internet connections? Waterproof Ethernet splitters for surveillance devices.

Secure internet connections? Waterproof Ethernet splitters for surveillance devices.

Secure internet connections? Waterproof Ethernet splitters for surveillance devices.

S
super_kuzma
Member
146
10-06-2016, 04:00 PM
#1
I monitor many security cameras across the farm to reduce long cable usage, especially since one run is around 350 feet. I’m using dual end splitters so two cameras can be connected per cable. The issue is they aren’t waterproof and even piling in some electrical grease didn’t fix it. Anyone know if there’s a reliable waterproof splitter available? I understand watertight connectors exist but not splitters specifically.
S
super_kuzma
10-06-2016, 04:00 PM #1

I monitor many security cameras across the farm to reduce long cable usage, especially since one run is around 350 feet. I’m using dual end splitters so two cameras can be connected per cable. The issue is they aren’t waterproof and even piling in some electrical grease didn’t fix it. Anyone know if there’s a reliable waterproof splitter available? I understand watertight connectors exist but not splitters specifically.

T
Turtle02536
Junior Member
22
10-06-2016, 07:11 PM
#2
Consider wrapping it tightly and joining the pieces together.
T
Turtle02536
10-06-2016, 07:11 PM #2

Consider wrapping it tightly and joining the pieces together.

A
aishamaron23
Junior Member
17
10-09-2016, 09:47 PM
#3
They stop working once you start testing, regardless of whether they’ve been on the job for a while or just a short time.
A
aishamaron23
10-09-2016, 09:47 PM #3

They stop working once you start testing, regardless of whether they’ve been on the job for a while or just a short time.

E
ethandizzy
Member
169
10-11-2016, 08:48 PM
#4
They’re meant for connecting multiple cables together, not adding extra devices to a single line. You pair them at both ends for proper coupling.
E
ethandizzy
10-11-2016, 08:48 PM #4

They’re meant for connecting multiple cables together, not adding extra devices to a single line. You pair them at both ends for proper coupling.

T
tada_da
Member
128
10-15-2016, 02:33 PM
#5
Standard Ethernet cables contain four wire pairs, but for high-speed applications like 100Mb connections you often only need two pairs. Splitters and combiners help utilize all four pairs for two devices. Using "Mode A" directs power onto the same pairs as data, whereas "Mode B" repurposes unused pairs in the cable.
T
tada_da
10-15-2016, 02:33 PM #5

Standard Ethernet cables contain four wire pairs, but for high-speed applications like 100Mb connections you often only need two pairs. Splitters and combiners help utilize all four pairs for two devices. Using "Mode A" directs power onto the same pairs as data, whereas "Mode B" repurposes unused pairs in the cable.

Y
YoloGeek22
Member
152
10-17-2016, 07:48 PM
#6
It functions effectively as long as water isn't present.
Y
YoloGeek22
10-17-2016, 07:48 PM #6

It functions effectively as long as water isn't present.

G
gabbylife
Member
228
10-18-2016, 06:55 AM
#7
I noticed no more suitable responses for your question. Have you thought about a wall-mountable, waterproof container with silicone? It seems the answer here doesn't need to be fancy—just practical and affordable. You might also craft your own watertight coupler by embedding the joint in resin or another substance like putty, silicone, or grease.
G
gabbylife
10-18-2016, 06:55 AM #7

I noticed no more suitable responses for your question. Have you thought about a wall-mountable, waterproof container with silicone? It seems the answer here doesn't need to be fancy—just practical and affordable. You might also craft your own watertight coupler by embedding the joint in resin or another substance like putty, silicone, or grease.

Z
Zaverns
Junior Member
31
10-19-2016, 08:18 PM
#8
I’d connect everything manually and use heat shrink for sealing. I’m planning to test the splitter first, since I’m worried about leaks from the sides.
Z
Zaverns
10-19-2016, 08:18 PM #8

I’d connect everything manually and use heat shrink for sealing. I’m planning to test the splitter first, since I’m worried about leaks from the sides.

_
_Brony_
Member
213
10-27-2016, 04:13 AM
#9
We're discussing a specific type of splitter. Do you have a model number? They produce connectors designed to join wires while sealing them simultaneously—primarily for securing connections and blocking water entry. Unfortunately, Cat5e cables use very thin wires. I doubt they manufacture such fine strands. I believe a sealed enclosure with silicone would be your optimal choice unless you can achieve a fully waterproof solution. Even if placed in an area where water doesn't collect, moisture or corrosion can still appear. It seems humidity is likely the main concern here.
_
_Brony_
10-27-2016, 04:13 AM #9

We're discussing a specific type of splitter. Do you have a model number? They produce connectors designed to join wires while sealing them simultaneously—primarily for securing connections and blocking water entry. Unfortunately, Cat5e cables use very thin wires. I doubt they manufacture such fine strands. I believe a sealed enclosure with silicone would be your optimal choice unless you can achieve a fully waterproof solution. Even if placed in an area where water doesn't collect, moisture or corrosion can still appear. It seems humidity is likely the main concern here.