s about x570 OC

John_Scarce
Junior Member

10-13-2019, 12:24 PM

i have an x570 TUF plus paired with a 3900x. i found a suitable configuration in Ryzen Master, 0.95v at 3500mhz, but i'm having trouble applying it in BIOS due to a few problems: 1) i set 0.95v in most voltage settings, yet Ryzen Master still shows 1.01v until i apply my profile, which then fixes it to 0.95—what voltage parameter is changing? 2) cores don’t sleep during idle even after adjusting BIOS settings, but they do when using Ryzen Master. 3) my RAM speed stays at 3600 even though I set it to 3666 in BIOS—any suggestions? i’m still getting the hang of CPU and RAM OC.

John_Scarce

10-13-2019, 12:24 PM #1

Zed_Zip_
Member

10-13-2019, 12:42 PM

These advanced configurations take precedence over the BIOS defaults, meaning you must reset the system by clearing the CMOS before entering BIOS settings.

Zed_Zip_

10-13-2019, 12:42 PM #2

These advanced configurations take precedence over the BIOS defaults, meaning you must reset the system by clearing the CMOS before entering BIOS settings.

_SkillzHD_
Junior Member

10-14-2019, 11:05 PM

It started with version 1.3v after a reboot, so I changed the settings in BIOS to set it as my default.

_SkillzHD_

10-14-2019, 11:05 PM #3

It started with version 1.3v after a reboot, so I changed the settings in BIOS to set it as my default.

Cychi
Member

176

10-24-2019, 11:53 PM

Navigate to the BIOS settings and activate offset mode. Adjust the offset until the desired voltage appears. Set the multiplier limit to 35 if needed. Keep in mind that Ryzen Master modifies VID, which might affect the displayed value.

Cychi

10-24-2019, 11:53 PM #4

Jag_congress
Junior Member

10-25-2019, 10:34 AM

I attempted to use offset, but it didn't function. It might be that the low-power mode lacked sufficient voltage to keep things running.

Jag_congress

10-25-2019, 10:34 AM #5

I attempted to use offset, but it didn't function. It might be that the low-power mode lacked sufficient voltage to keep things running.

3gilad3
Senior Member

735

10-26-2019, 07:35 AM

Zen 2 experiences reduced performance when voltage levels are insufficient, even without a crash. Have you checked benchmark data across both high and low voltage scenarios?

3gilad3

10-26-2019, 07:35 AM #6

Zen 2 experiences reduced performance when voltage levels are insufficient, even without a crash. Have you checked benchmark data across both high and low voltage scenarios?

PersieO
Posting Freak

786

11-02-2019, 02:11 PM

I confirmed it works at 3500 with a stable result after 8+ hours of testing using IntelBurntTest and CineBench, showing the percentage difference versus the original version.

PersieO

11-02-2019, 02:11 PM #7

I confirmed it works at 3500 with a stable result after 8+ hours of testing using IntelBurntTest and CineBench, showing the percentage difference versus the original version.