Ryzen 7 2700X is a powerful processor model.

ImWinky
Member

151

09-25-2018, 10:29 PM

Hello, your Ryzen 7 2700X is showing limited performance at 4.3GHz during gaming. Power mode maxes out at 4GHz, and even with Ryzen Master set to 4.3GHz it caps around 3.6GHz in CPUZ. The system sometimes shuts down. Consider checking BIOS settings for higher overclocking limits or consulting a professional for stability before pushing further.

ImWinky

09-25-2018, 10:29 PM #1

titowulk
Member

156

10-02-2018, 01:07 AM

Your 2700X didn’t offer much gain from overclocking in practical terms. The biggest improvement came from using high-speed RAM, though AM+ stability dropped after reaching 3200MHz—still better than your 2666MHz setup.

titowulk

10-02-2018, 01:07 AM #2

Ript_Inferno
Member

104

10-03-2018, 01:56 PM

It sounds like your system is limited by an outdated CPU and slow RAM, causing instability at 4.3Ghz. Checking Reddit suggests overclocking won’t significantly improve performance for this chip. If you're focused on raw speed, keep going—but for better gameplay, upgrading hardware would be necessary.

Ript_Inferno

10-03-2018, 01:56 PM #3

Yokijirou
Member

134

10-06-2018, 09:14 AM

It's unlikely overclocking will significantly improve your gaming experience. You might see better multi-threaded performance under heavy loads, but for games, keeping the CPU at its default speed usually provides more consistent results.

Yokijirou

10-06-2018, 09:14 AM #4

duper123
Junior Member

10-06-2018, 10:57 PM

You're confused, but it sounds like your system is showing incorrect RAM speeds. The numbers you see in the task manager and AMD Adrenaline are likely wrong. Windows might be misreporting due to driver issues or a corrupted system. Check your RAM settings manually in Device Manager and ensure it matches the actual specifications. Also, monitor temperatures closely—high temps can cause unexpected shutdowns. If this keeps happening, consider reinstalling drivers or running a system repair. Let me know if you need further help!

duper123

10-06-2018, 10:57 PM #5

kolmorka1000
Junior Member

10-07-2018, 05:36 PM

kolmorka1000

10-07-2018, 05:36 PM #6

TheJKLM
Member

110

10-13-2018, 06:40 PM

Refer to the previous discussion, verify the power plan detailed configuration. The CPU field should display defined minimum and maximum values. Check if these were updated using Ryzen Master.

TheJKLM

10-13-2018, 06:40 PM #7

Refer to the previous discussion, verify the power plan detailed configuration. The CPU field should display defined minimum and maximum values. Check if these were updated using Ryzen Master.