F5F Stay Refreshed Hardware Desktop Ryzen 5900x performance test results

Ryzen 5900x performance test results

Ryzen 5900x performance test results

M
MarcMcvey
Member
60
10-08-2020, 02:20 AM
#1
The performance you're observing is typical for stock cooling in high-performance setups. The slight dip to 4.0Ghz during CB23 while all cores run indicates the cooler isn't fully utilizing its potential under load. With a temperature range of 66°C to 74°C, the system maintains stable operation but doesn't push beyond expected limits. This behavior is normal as thermal headroom allows for consistent performance without excessive boosts.
M
MarcMcvey
10-08-2020, 02:20 AM #1

The performance you're observing is typical for stock cooling in high-performance setups. The slight dip to 4.0Ghz during CB23 while all cores run indicates the cooler isn't fully utilizing its potential under load. With a temperature range of 66°C to 74°C, the system maintains stable operation but doesn't push beyond expected limits. This behavior is normal as thermal headroom allows for consistent performance without excessive boosts.

C
clanithom
Junior Member
4
10-09-2020, 08:10 PM
#2
You might be reaching the maximum power threshold.
C
clanithom
10-09-2020, 08:10 PM #2

You might be reaching the maximum power threshold.

C
70
10-09-2020, 11:06 PM
#3
Yes, the chip seems to be functioning within its expected parameters. It operated normally otherwise, which helps confirm the purchase was valid.
C
Chilled__Chaos
10-09-2020, 11:06 PM #3

Yes, the chip seems to be functioning within its expected parameters. It operated normally otherwise, which helps confirm the purchase was valid.

R
Reepety
Senior Member
374
10-11-2020, 02:36 PM
#4
It appears the value is adjusted slightly. PPT is configured to a specific setting.
R
Reepety
10-11-2020, 02:36 PM #4

It appears the value is adjusted slightly. PPT is configured to a specific setting.

L
Liam_M_5000
Member
72
10-12-2020, 01:55 AM
#5
The PPT measures 142W, yet it didn’t reach 98% during testing. The TDC (95A) and EDC (140A) both quickly stabilized at 100%.
L
Liam_M_5000
10-12-2020, 01:55 AM #5

The PPT measures 142W, yet it didn’t reach 98% during testing. The TDC (95A) and EDC (140A) both quickly stabilized at 100%.