Reviewing BIOS configurations for the MSI MAG Z490 Tomahawk.
Reviewing BIOS configurations for the MSI MAG Z490 Tomahawk.
There are numerous settings to review. Consider checking a BIOS manual. Typically, just set your XMP profile and other options can remain standard unless you have particular requirements. EIST should be activated in most scenarios. I own an MSI Z490 motherboard, so if you have any specific concerns, I’ll do my best to assist.
Hey there! For PL1 and PL2 you're thinking about, 125W and 65W seem reasonable depending on your needs. The system runs well with an Intel i5-10500 and those voltage ranges look fine for a CPU built on 14nm. Regarding the current limits, the "CPU Current Limit (A)" setting is likely tied to amperage thresholds rather than just amps—check the manual for exact details. Auto mode should work unless you notice overheating. As for your Z490 Tomahawk versus B450M Mortar MAX, both have different BIOS configurations, so expect varied settings overall. Let me know if you need more clarity!
I haven't encountered those settings before, so I can't assist effectively. It seems you're focusing on overclocking, which I don't prioritize.