Requesting assistance with a nas file.
Requesting assistance with a nas file.
You're aiming for a compact server solution that supports film storage, streaming, and printing with minimal cost. Here’s a concise breakdown:
- **Budget focus:** Keep it under £100, prioritizing affordability.
- **Key needs:** Film storage, media playback, easy data transfer, NAS functionality, and basic printing.
- **Recommended approach:** Look for budget-friendly desktop or mini-PC servers with integrated storage and networking capabilities.
### Specific suggestions:
1. **Raspberry Pi 4 + external SSD** – Not a server but can host files locally; pair with a small NAS module if you need more space.
2. **Micro-ITX or Mini-ITX desktop** – These are compact, low-cost options that can run lightweight NAS software (like TinyFS or FreeNAS).
3. **Budget NAS options:** Consider models like the **Raspberry Pi Pico W with external drive** or entry-level NAS units such as the **TP-Link TL-WN6000** (under £50 for a basic version).
### Estimated spending:
- **Minimum viable setup:** ~£30–£60 for a basic NAS-capable PC or Raspberry Pi combo.
- **Under £100 target:** Aim for a used or refurbished model with at least 256GB SSD storage.
### Tips:
- Use a budget NAS software to avoid high hardware costs.
- Look for refurbished or second-hand units to save money.
- If you want more power, consider a small desktop with a dedicated GPU for streaming.
Let me know if you'd like links or further guidance on assembling such a system!
Is an 860 consuming much power? You're looking for something efficient, so a modern laptop with USB ports and RAID 1 would fit well. If you need something newer yet similar in performance, there are options available, though they’re often limited to parts availability.
Are you kidding me? The Dell 860 is legacy tech! It takes the least amount of power even compared to a variety of "basic" desktops . Do NOT use a laptop, much less with raid-1... and stay away from ANY form of software raid. Trust me, that's all been done before, and I can't even begin to describe the horror stories regarding performance-- or the lack thereof. If you want something "newer" and in 1U space, be prepared to sacrifice your a large portion of your hearing, as the 40mm fans that are commonly used will at the very least annoy you to death, or even be deafening at high speeds. But if you insist , any garden variety supermicro server found on eBay will do everything you want and then some. If low noise and manageability are part of what you seek, go for a 2U system. If you need lots of storage and use lots of drives, go straight for 3U.
Consider an HP 6305 for a more intuitive home-NAS setup. It offers solid features for basic storage needs—whether you rely on few drives or have one large central drive—or for experimenting with typical hobby projects. Make sure to run a server OS such as Windows Server or a Linux distribution so multiple users can access the system's resources efficiently.
I’m flexible and have a large array with just a switch. I’m okay with doing 20u if needed. What would you like to try? The 860 model works, but most of them are old and could fail soon. For performance on RAID 1, it’s not crucial since write speeds are around 8MB/s. There might be some latency concerns or other issues, but it shouldn’t stop me. I’d prefer at least two drives, ideally up to fifty for better reliability. I’m open to many options and want the ability to expand later, though I’m aware ZFS can be a challenge.
you can connect multiple drives to a device like the hp6305, but usb isn't recommended for zfs because it can cause data corruption.
For slow performance and if you're on Linux, any server works just fine. When it comes to RAID or backup options, manual or automatic disk imaging is preferable. The process depends on the software you select. The 6305 supports two HDDs when a mounting adapter is installed in the 5.25" bay.