Request for assistance
Request for assistance
You must adjust those connections to restore the CPU function. If you're fortunate, some pins remain unused, though I doubt it. Breaking one pin will disable the CPU completely. The required BIOS is P 7.30, and the manual mentions flashing the earlier 7.00 version first. Did you follow that sequence? Also, what was your previous CPU model? If you're using a Bristol Ridge (named with an A followed by a number), it's no longer compatible with the 7.0 BIOS—so you won't be able to upgrade to the full 7.3 version from those chips.
Hi there, thank you for your message. I should have noted earlier that the old CPU stopped functioning before I updated the BIOS and reinstalled the system. It worked fine once I confirmed that.
This could be an issue. Could you share the manufacturer's perspective on what occurs when you skip installing version 7.00, and whether a workaround is possible?
Also check if your motherboard pins are in good condition and consider returning it if it's still under warranty. It seems there might be an issue with the system, possibly due to a fault with one of the CPUs. You could also try using a spare power supply. Be aware that power surges or brownouts can trigger similar problems.