Reduce BIOS startup time by optimizing settings, updating firmware, and ensuring proper hardware configuration.
Reduce BIOS startup time by optimizing settings, updating firmware, and ensuring proper hardware configuration.
I've observed that my PC is showing a significantly longer BIOS time than expected. While my system runs a 6th generation i5 processor with 6GB RAM, it displays only about 5 seconds in BIOS. This is unusual compared to what I'd consider normal for this hardware. I've checked several factors: the boot priority is set correctly, network booting isn't being attempted, and fast startup is disabled. The only remaining option is ultra-fast startup, which would prevent entering BIOS without resetting CMOS. Other possibilities include a potential issue with the motherboard or BIOS configuration. Could there be another reason behind this extended BIOS duration? I'd appreciate any insights or solutions that might help.
You can start BIOS without resetting CMOS by using Windows restart settings (search "restart" and select "Change Advanced Startup Options"). Then press the "Restart now" button under "Advanced startup." If everything functions properly, you can turn off memory checks on every boot, disable memory change detection, skip other tests, turn off SMART checks, stop network boot, and so on as needed. Try it out—what could go wrong? And activate that quick boot option. Don't worry.
Thanks for your guidance. I plan to disable certain features and verify the system's status. As far as the advanced startup is concerned, I attempted it but couldn't access the motherboard BIOS. I noticed a USB boot option but no direct BIOS menu. I’ll skip the quick startup unless it’s secure. My main goal was to confirm there are no issues with my PC. Appreciate your memory check suggestion—I’ll test disabling it and see the impact. Edit: After some research, I realized the BIOS settings are in the troubleshoot menu under advanced restart options. I hadn’t checked that area before. I’ll also explore enabling super fast boot. I should wait until I finish what I’m doing on my computer before making any changes.
Turn off unnecessary features in the BIOS that aren’t required. For example, if you don’t use SATA and have a setting to disable it, try it. If the board performs a RAM check, you can also turn that off. The idea is to disable what you don’t need and activate the quick startup options.
To start quickly, press fast boot or super fast boot, then click the restart button in Windows. The system will restart and display a blue menu asking you to choose an option. Pick Troubleshoot, then Advanced, and finally EUFI firmware settings.
I share my advice based on real experience. Follow what works for you.