F5F Stay Refreshed Hardware Desktop Red light on CPU indicates a problem with the processor.

Red light on CPU indicates a problem with the processor.

Red light on CPU indicates a problem with the processor.

P
Purpleb12
Junior Member
12
07-20-2018, 07:54 AM
#1
Hello looking for help on a potential problem with my i7 9700k. Red light on motherboard for CPU, as well as cpu running hot. Temps are around 100C (212F) with just discord and maybe twitch running off of chrome. Tried updating BIOS on 5/7/2020 and swapping my H100i Pro plug from AIO cooler to CPU fan with no change. Fans on the Radiator are CORSAIR - HD Series 120mm. Any help is appreciated, thanks
P
Purpleb12
07-20-2018, 07:54 AM #1

Hello looking for help on a potential problem with my i7 9700k. Red light on motherboard for CPU, as well as cpu running hot. Temps are around 100C (212F) with just discord and maybe twitch running off of chrome. Tried updating BIOS on 5/7/2020 and swapping my H100i Pro plug from AIO cooler to CPU fan with no change. Fans on the Radiator are CORSAIR - HD Series 120mm. Any help is appreciated, thanks

A
AntonioGaymer
Member
229
07-29-2018, 08:30 PM
#2
Did you verify the pump status in the BIOS or with other programs? Ensure the heatsink is properly positioned. Reapplied thermal paste. Consider using a different cooler.
A
AntonioGaymer
07-29-2018, 08:30 PM #2

Did you verify the pump status in the BIOS or with other programs? Ensure the heatsink is properly positioned. Reapplied thermal paste. Consider using a different cooler.

O
Okunino
Posting Freak
845
07-31-2018, 05:30 AM
#3
The only other cooler I own is a stock Intel model that came with a 6700. I haven’t altered the pre-applied thermal paste and made sure it’s properly seated. I hope I followed the instructions and watched the YouTube video. I’ll switch the paste now—I have a spare stick just in case, thanks!
O
Okunino
07-31-2018, 05:30 AM #3

The only other cooler I own is a stock Intel model that came with a 6700. I haven’t altered the pre-applied thermal paste and made sure it’s properly seated. I hope I followed the instructions and watched the YouTube video. I’ll switch the paste now—I have a spare stick just in case, thanks!

B
Blockwalker02
Member
181
08-02-2018, 08:02 AM
#4
I'd verify the cooler pump is operating first. It's completely possible it isn't. If you're uncertain, you can look it up in the BIOS or use most fan software—RPM should be 4000 or higher. Also, when reapplying thermal paste, make sure you take off the sticker from the heatsink. Sounds like a simple oversight, but I've seen others do it, not that I've experienced it myself...
B
Blockwalker02
08-02-2018, 08:02 AM #4

I'd verify the cooler pump is operating first. It's completely possible it isn't. If you're uncertain, you can look it up in the BIOS or use most fan software—RPM should be 4000 or higher. Also, when reapplying thermal paste, make sure you take off the sticker from the heatsink. Sounds like a simple oversight, but I've seen others do it, not that I've experienced it myself...

T
TooMarlin
Member
60
08-02-2018, 04:40 PM
#5
Currently the pump is locked at 1080rpm according to the ICUE software attempting to figure out how to bypass it
T
TooMarlin
08-02-2018, 04:40 PM #5

Currently the pump is locked at 1080rpm according to the ICUE software attempting to figure out how to bypass it

F
Foxehh
Junior Member
10
08-03-2018, 10:28 PM
#6
You probably shouldn't need to do anything special—maybe you were thinking about the H60. I should check some details. After looking it up, your H100i seems to be in quiet mode. Switching it to extreme mode might help with the temperatures. Also, have you double-checked the readings using another program?
F
Foxehh
08-03-2018, 10:28 PM #6

You probably shouldn't need to do anything special—maybe you were thinking about the H60. I should check some details. After looking it up, your H100i seems to be in quiet mode. Switching it to extreme mode might help with the temperatures. Also, have you double-checked the readings using another program?

K
Kaspolman
Senior Member
434
08-04-2018, 09:16 PM
#7
I increased it to maximum and the pump's RPM stayed at 1080—seems like it can't be adjusted anymore. It appears the pump has an AIO slot, a CPU fan (1), and the CPU ID reports the same elevated temperatures.
K
Kaspolman
08-04-2018, 09:16 PM #7

I increased it to maximum and the pump's RPM stayed at 1080—seems like it can't be adjusted anymore. It appears the pump has an AIO slot, a CPU fan (1), and the CPU ID reports the same elevated temperatures.

F
FlashAnimator
Member
101
08-05-2018, 03:09 AM
#8
After reviewing the unboxing videos and product images, I’m convinced the pump sensor plug might be missing a wire—it seems to have only one instead of the expected two.
F
FlashAnimator
08-05-2018, 03:09 AM #8

After reviewing the unboxing videos and product images, I’m convinced the pump sensor plug might be missing a wire—it seems to have only one instead of the expected two.

I
iarouse
Junior Member
36
08-11-2018, 01:10 AM
#9
Consider that investment and test it out.
I
iarouse
08-11-2018, 01:10 AM #9

Consider that investment and test it out.