F5F Stay Refreshed Hardware Desktop Recovery of biological samples

Recovery of biological samples

Recovery of biological samples

X
xXDaniMineXx
Junior Member
Find
12
05-16-2023, 06:49 AM
#1
Are you able to fix a damaged motherboard BIOS using BIOS Flash Back or the Asus crash-free BIOS 3 for the B450M-A II?
Reply
Reply
X
xXDaniMineXx
05-16-2023, 06:49 AM #1

Are you able to fix a damaged motherboard BIOS using BIOS Flash Back or the Asus crash-free BIOS 3 for the B450M-A II?

Reply
Reply
_
_dorak_
Member
Find
53
05-17-2023, 05:34 PM
#2
It might be possible if the motherboard issue stemmed from a faulty BIOS update. A corrected BIOS flash could likely resolve the problem.
Reply
Reply
_
_dorak_
05-17-2023, 05:34 PM #2

It might be possible if the motherboard issue stemmed from a faulty BIOS update. A corrected BIOS flash could likely resolve the problem.

Reply
Reply
A
Area_74
Junior Member
Find
15
05-17-2023, 10:19 PM
#3
Occasionally. It can vary, but it tends to function.
Reply
Reply
A
Area_74
05-17-2023, 10:19 PM #3

Occasionally. It can vary, but it tends to function.

Reply
Reply
M
Maximoreyrojo
Member
Find
141
05-25-2023, 06:55 PM
#4
You might try using the bios flashback feature. If that fails, check the TPM header—assuming it's SPI-based and not LPC-based—you could use a budget ch341a BIOS programmer with a female-to-female jumper setup. The device appears SPI-oriented near the bios chip and CMOS battery. If it's an LPC-based header, you'd need to desolder the chip onto an adapter board before programming. Without a proper hot air tool that’s tough to handle, you can still connect a cheap debug card to read postcodes.
Reply
Reply
M
Maximoreyrojo
05-25-2023, 06:55 PM #4

You might try using the bios flashback feature. If that fails, check the TPM header—assuming it's SPI-based and not LPC-based—you could use a budget ch341a BIOS programmer with a female-to-female jumper setup. The device appears SPI-oriented near the bios chip and CMOS battery. If it's an LPC-based header, you'd need to desolder the chip onto an adapter board before programming. Without a proper hot air tool that’s tough to handle, you can still connect a cheap debug card to read postcodes.

Reply
Reply