Recent issues with Mobo and DDR5 components Confusion surrounding new hardware selections
Recent issues with Mobo and DDR5 components Confusion surrounding new hardware selections
You're thinking about moving up to a more powerful setup, aiming for a 17-12700K system. Right now you're using an i5-8600k with a 2080s, which you're aware has some bottlenecks—so the upgrade makes sense. You're planning to switch to DDR5 and understand that prices are steep, but you value future-proofing. Regarding the RAM you chose, it's 32GB at 5200MHz. The MOBO claims it supports up to 5200MHz, though your CPU only reaches 4800MHz. That means the RAM's maximum speed matches your CPU, so it should work fine. It’s not a dealbreaker. You're open to considering other options like the RAM model, CPU choices, or alternatives if needed.
In theory, it's possible to boost RAM and CPU speeds along with a mobile motherboard to 5200MHz.
Upgraded to a 13900k yet price dropped by 200£. This is more than enough—showcasing how much more powerful your upgrade can be if you skip the extra cooling and power components. Save 200£ if you don’t need the eco modules. For DDR5, stick with 5200 chips; they’re not future-proofing you, especially with low-quality variants. Current options seem limited to around 7000, possibly due to poor component quality. If you truly want long-term support, avoid overclocking now—7000+ kits are out of reach and stock is scarce. Consider buying a 16gbit Hynix die on eBay for a potential 7600+ option, which may not be fast but will last through the entire DDR5 era. Check out frame chasers on YouTube for bare PCB builds featuring these parts.
it's not about scarcity but DDR5 isn't set to last forever. Even with newer chips from Hynix now, upcoming models in a few years will likely make it obsolete, so it's not a smart move. Plus, future needs might be bigger—maybe you'll require more than 64GB, which would render your efforts pointless while offering little real benefit. RAM speed isn't the main concern here.
Also, the 7000x is a huge tower case, typically used for EATX mobos or custom watercooling setups. It's popular among enthusiasts, but for everyday use it's more of a niche choice. A standard case around 4000D should suffice for most people.
I understand it's been a full tower setup for eight years, and I used to dislike the mid-tower version. Now I'm looking for a compromise—I really enjoy Corsair, so I feel like a shill. The Cooler, tower, and case aren't too important to me since I'm a working guy. But as you mentioned, the 13th generation is almost here, so I might hold off until benchmarks against Ryzen 7000 come out before deciding.