F5F Stay Refreshed Hardware Desktop Reading and fixing the drive labeled C:... on Windows 11 version 25H2

Reading and fixing the drive labeled C:... on Windows 11 version 25H2

Reading and fixing the drive labeled C:... on Windows 11 version 25H2

C
carloeliano
Member
78
09-29-2021, 03:57 PM
#1
Hello everyone, following the 25H2 update installation, I consistently receive a message indicating my drive is being scanned and repaired. I have two storage devices: an NVME drive (WDC WDS250G1B0C-00S6U0, 256TB) and a SATA drive (Samsung 860 EVO, 1TB). Windows displays the NVME as disk 1 and the SATA as disk 0. This seems unusual. I've attempted to run chkdsk, used Windows Update for repairs, and even tried troubleshooting during restarts, but the issue persists. My mouse and keyboard stop functioning. I've also checked the drive firmware, confirming it's already up to date. Any suggestions on what to try next? Additionally, Crystaldiskinfo reports the drive is at 94% utilization.
C
carloeliano
09-29-2021, 03:57 PM #1

Hello everyone, following the 25H2 update installation, I consistently receive a message indicating my drive is being scanned and repaired. I have two storage devices: an NVME drive (WDC WDS250G1B0C-00S6U0, 256TB) and a SATA drive (Samsung 860 EVO, 1TB). Windows displays the NVME as disk 1 and the SATA as disk 0. This seems unusual. I've attempted to run chkdsk, used Windows Update for repairs, and even tried troubleshooting during restarts, but the issue persists. My mouse and keyboard stop functioning. I've also checked the drive firmware, confirming it's already up to date. Any suggestions on what to try next? Additionally, Crystaldiskinfo reports the drive is at 94% utilization.

B
blackceaser
Member
119
10-06-2021, 01:47 PM
#2
You have dual SSDs, but the status of the other drive is unclear. It seems processes won't start. If your OS runs on the NVMe drive, consider swapping out the SATA one to test. If that doesn't help, you might try a Windows repair via USB installer: https://support.microsoft.com/en-us/wind...9e2b022fc7
B
blackceaser
10-06-2021, 01:47 PM #2

You have dual SSDs, but the status of the other drive is unclear. It seems processes won't start. If your OS runs on the NVMe drive, consider swapping out the SATA one to test. If that doesn't help, you might try a Windows repair via USB installer: https://support.microsoft.com/en-us/wind...9e2b022fc7

D
DerpyPig9
Member
98
10-06-2021, 02:54 PM
#3
Relocated to Troubleshooting section
D
DerpyPig9
10-06-2021, 02:54 PM #3

Relocated to Troubleshooting section

S
SwagBOMc
Junior Member
17
10-23-2021, 12:49 AM
#4
It seems you're experiencing issues during a restart, particularly with the Windows Recovery Environment and hardware functionality. The problem might be related to BIOS settings or a temporary system state. You mentioned concerns about data loss, so it's wise to back up your information before proceeding. If you decide to try the recovery method, ensure you have a stable connection and follow the steps carefully. Let me know if you need further guidance!
S
SwagBOMc
10-23-2021, 12:49 AM #4

It seems you're experiencing issues during a restart, particularly with the Windows Recovery Environment and hardware functionality. The problem might be related to BIOS settings or a temporary system state. You mentioned concerns about data loss, so it's wise to back up your information before proceeding. If you decide to try the recovery method, ensure you have a stable connection and follow the steps carefully. Let me know if you need further guidance!

E
Ender_Girl_LAF
Member
190
10-23-2021, 01:30 AM
#5
You handled the entire repair from the Windows recovery screen? (Check the photo) Or did you try something else—use the search bar, open the "black window" in admin mode (right-click...), then run DISM.exe /Online /Cleanup-image /Restorehealth? Enter when done and follow DISCIPLE steps. If you stick to the guidance, it should work. Edited October 16, 2025 by leclod
E
Ender_Girl_LAF
10-23-2021, 01:30 AM #5

You handled the entire repair from the Windows recovery screen? (Check the photo) Or did you try something else—use the search bar, open the "black window" in admin mode (right-click...), then run DISM.exe /Online /Cleanup-image /Restorehealth? Enter when done and follow DISCIPLE steps. If you stick to the guidance, it should work. Edited October 16, 2025 by leclod

S
skovbo1801
Member
186
10-23-2021, 01:22 PM
#6
I gave it everything I had and still nothing. I suspected a GPU driver issue, but even after a fresh install it didn’t work. Then I discovered a workaround! I had to set up a Windows Media Tool on a USB stick, boot from it, and after selecting repair I chose the advanced options. From there I picked Startup repair. The PC entered a repair screen and everything was fixed after about ten minutes. Thanks @leclod for your assistance!
S
skovbo1801
10-23-2021, 01:22 PM #6

I gave it everything I had and still nothing. I suspected a GPU driver issue, but even after a fresh install it didn’t work. Then I discovered a workaround! I had to set up a Windows Media Tool on a USB stick, boot from it, and after selecting repair I chose the advanced options. From there I picked Startup repair. The PC entered a repair screen and everything was fixed after about ten minutes. Thanks @leclod for your assistance!