ramRAM Rabbithole is a character from the game Rabbithole.
ramRAM Rabbithole is a character from the game Rabbithole.
Sure thing! Here’s a rephrased version of your message:
Hey everyone, I realize there might be others facing similar challenges, and I’ve already skimmed through at least five previous discussions. However, I haven’t found a thread that matches exactly what I’m experiencing. This is going to be quite detailed, but I want everything clear so anyone can spot any potential issues I might have missed.
I recently put together a new PC setup: Corsair 4000D airflow, 5600X on a 240mm AIO, RTX 3090 FE with thermal pads (just the backplate, not the full repaste), 32GB (8x4) RAM (rated between 3200-5000), an MSI X570 gaming motherboard plus M.2 slot, an 850W Corsair power supply, and a bunch of RGB lighting I used for a while on standard components. I think the system has factory overclocking enabled, but the RAM seems to be causing problems—especially when trying to apply XMP profiles.
The machine runs smoothly until I try any kind of XMP setting. It always defaults to 2666 when XMP is disabled (confirmed with CPU-Z). Both XMP profiles are set to auto 3200 MHz, but whenever I enable them, I experience random Chrome tab crashes, general instability, and sudden performance drops. It’s become so bothersome that I decided to turn XMP off.
I verified that my CPU supports up to 3200 MHz, as does the RAM and motherboard. I ran a Prime95 stress test, but almost immediately, all 12 tests failed with an error or “Not Running” message. Some reported fatal errors, while others just said something was wrong. I also tried running it in Blender mode and RAM-intensive mode, but the problems persisted.
I only noticed BSOD issues after switching to a second set of 16GB RAM, which turned out to be faulty. Once I replaced them, the system no longer crashed.
I’m trying to figure out where things went wrong or if there’s something specific I did incorrectly. Any tips or insights would be really helpful!
Edit: Right after posting, I played Fortnite with friends and immediately experienced a complete system crash—no BSOD, just a total shutdown that rebooted into BIOS.
Updated: September 26, 2021 – by Iamyourfatha
Next step would be experimenting with various RAM setups, beginning with matched modules first, and checking performance at both standard speeds and with 3200MHz XMP enabled. Ideally, you should be able to identify which sticks fall short in either setting. If even the 5000MHz RAM fails when XMP is active at 3200MHz, it likely indicates a faulty motherboard or CPU. I’m just starting out, so keep your suggestions cautious. My background is mainly with DDR3, but I’ve faced problems where mixing 8Gb and 4Gb modules caused boot issues in my 2011 iMac—pairing the 8Gb sticks worked, but combining 4s and 2s didn’t.
You didn't mention the RAM type. I'm guessing it's Corsair memory, which often doesn't hit its advertised speeds. Avoid mixing different types and applying XMP profiles—you'll likely face problems. The safest way to confirm full stability is using TM5 with the Antta1 Extreme profile.
Thanks for the input! I’ve checked all 4 sticks using memtest86 and mixed sets of two or five times each, which should catch any problems. Your examples helped too—I faced similar issues with my previous setup, so I gave it a chance. Now that I’ve invested in this, it really matters to get it right.
Hey! Glad you found the advice helpful. Your RAM setup looks solid—4 sticks of 8GB XPG at 3200 MHz, all the same. You bought two sets and plan to get another pair in about two weeks. I’ll use TM5 with the Antta1 Extreme profile. ^^ I’m excited to give it a try! Also, just a quick note: Ruka is the best girl squad (your profile pic).
she is the best girl here! but i haven't really seen this thing move much, so i'm not sure i can help much. if mem test came back clean, it should be okay. for now, with a ryzen system, you might want to tweak the system voltage up to around 1.15v-1.20v—though your model is 5000, that might not fix it. i usually only use it when i suspect fclk problems. maybe the board or memory is faulty, which can happen. updating the bios to the latest version could help, as some ram issues have been fixed there. it might be worth trying a 0101 setup by removing two sticks and placing them in one slot.
I figured the same for myself—bringing back all four sticks and using just one 16GB drive should work. It’ll keep things simple and stable, as suggested on YouTube. I think it’s better than risking performance issues from too many cables or messy connections. Watching the pros do it really shows how easy it is. I’ve also checked several troubleshooting guides, but nothing helped much. The process was tough since I’m new to cable management.
Did you purchase two units of the kit referenced? Were they acquired simultaneously or at different times? You might also attempt adjusting the BIOS settings manually to observe improved stability. The kit you linked operates at 3200 MHz, which allows higher performance but can become less reliable as timing parameters drift.
They were purchased roughly two weeks apart, identical units. The first one worked well, but the second triggered memory failure alerts during memtest, so I swapped it in. After receiving the replacement pair, I ran another test and everything was error-free. Yes, it’s a 3200 MHz model, but it stalls randomly when XPG is off or jumps to 3200 MHz, then waits for a game to load. It functions perfectly at 2666 MHz (XPG disabled), but performance drops once it hits the full 3200. I’m considering checking the memory stick and verifying timing alignment before creating a new profile with those settings. I’ll definitely try that and follow up.