Ram Xmp 2400 MHz leading to boot issues
Ram Xmp 2400 MHz leading to boot issues
I previously increased my RAM speed to 2400MHz using XMP profile 1 in the memory settings. Both RAM sticks were installed in slots 4_1 and 4_2. Recently, I switched the RAM slots to verify functionality. After turning on my system, a boot failure error appeared. When I reinserted the RAM into slot 4_2, the same error persisted. I reset the BIOS but the problem continued. Until recently, everything worked smoothly with XMP profile 1. The change in RAM slots now seems to be the cause. Please, experts, assist me with this issue.
I use DDR4_1 and DDR4_2. I actually wanted to purchase two more RAM sticks, so I checked if the remaining slots are still functional. I plan to enable it.
You followed the instructions precisely, but the issue persisted after switching the RAM slot. File: VID_20200813_205550(0)_(1).mp4