RAM Issue

Pages (2): 1 2 Next

pa55w0rd
Member

181

11-25-2017, 02:38 AM

You're experiencing a RAM issue where the system shows only 16 GB available despite having 32 GB installed. Your CPU is a Ryzen 7 1800X with an ASRock Killer X370, and you're using Corsair Vengeance LPX. The problem is that Windows doesn't recognize the full capacity, and your BIOS reports a 1067 MHz speed for all sticks, but Task Manager limits it to 3000 MHz. You've checked online troubleshooting steps and are stuck.

pa55w0rd

11-25-2017, 02:38 AM #1

kelusky101
Member

181

11-25-2017, 04:10 AM

Begin with an alternative method instead of using Task Manager. Always verify the seating position correctly. Are you certain it's 34 gigs or not 32? The system interprets dual-channel speed as around 2133; make sure XMP/DCOP is activated in BIOS if needed. Update your BIOS if necessary. Edited May 20, 2020 by TofuHaroto Missed an update.

kelusky101

11-25-2017, 04:10 AM #2

SinAyy
Member

204

11-26-2017, 06:04 PM

I see, thank you. Let's try again.

SinAyy

11-26-2017, 06:04 PM #3

I see, thank you. Let's try again.

mavzer75
Junior Member

12-03-2017, 03:20 AM

activate XMP support in BIOS settings

mavzer75

12-03-2017, 03:20 AM #4

activate XMP support in BIOS settings

jojoFRITE
Junior Member

12-03-2017, 06:00 AM

Sure, let me review what you mentioned. 😊

jojoFRITE

12-03-2017, 06:00 AM #5

Sure, let me review what you mentioned. 😊

HEROBRITT
Junior Member

12-09-2017, 01:28 PM

I opened the settings and found it already configured for "auto" at 2133 MHz. I entered my own custom frequency of 3000 MHz, but the BIOS still displays it as 2133 MHz.

HEROBRITT

12-09-2017, 01:28 PM #6

I opened the settings and found it already configured for "auto" at 2133 MHz. I entered my own custom frequency of 3000 MHz, but the BIOS still displays it as 2133 MHz.

Carsland123
Senior Member

398

12-12-2017, 06:51 PM

Here’s a visual representation: two readings shown side by side, one displaying current frequencies and the other base speed.

Carsland123

12-12-2017, 06:51 PM #7

Here’s a visual representation: two readings shown side by side, one displaying current frequencies and the other base speed.

oHits
Member

176

12-13-2017, 01:39 AM

Yes, I applied the changes.

oHits

12-13-2017, 01:39 AM #8

Yes, I applied the changes.

JP_0620
Junior Member

12-14-2017, 01:53 PM

Apply, save and exit.

JP_0620

12-14-2017, 01:53 PM #9

Apply, save and exit.

mezaa_eclipse
Member

12-15-2017, 06:36 AM

#10

Visit hwinfo64 to check the available readings.

mezaa_eclipse

12-15-2017, 06:36 AM #10

Visit hwinfo64 to check the available readings.

Pages (2): 1 2 Next