Questionpls help
Questionpls help
I connected the 4-pin CPU connector on the upper left side.
I didn’t add any stand-offs since there were none on the previous motherboard.
The graphics card is fully seated; I tried both GTX 750 and GTX 1060, which have extra 6-pin connectors, so it was plugged in correctly.
I installed the RAM stick properly—only one 8GB DDR4 2133MHz with two slots, and it works fine.
The CPU was placed correctly; all pins were inserted properly. I first lifted the pins and then put it in, ensuring nothing was bent.
I don’t have a CPU cooler, so I’m unsure what might be wrong.
There are no wires under the motherboard.
I placed everything on the box, not on the carpet.
I didn’t install a system speaker; I only connected the power switch.
The power supply is on, and the CPU is supported with the latest BIOS update.
I didn’t reset the CMOS; I had to install a new battery. The motherboard came without one, so I used the old one.