F5F Stay Refreshed Hardware Desktop Question Very uncommon lockups with unclear reasons

Question Very uncommon lockups with unclear reasons

Question Very uncommon lockups with unclear reasons

L
louie018
Posting Freak
824
01-17-2021, 01:03 AM
#1
I lack substantial log files for this situation, so I have to describe it in the best way possible.
L
louie018
01-17-2021, 01:03 AM #1

I lack substantial log files for this situation, so I have to describe it in the best way possible.

B
Bifes_PT
Member
205
01-17-2021, 07:04 AM
#2
Updated BIOS on motherboard after confirming the BIOS update to the newest version?
RTX 4070, current drivers
Previous GPU drivers handled with DDU, then reinstalled with latest from Nvidia site?
B
Bifes_PT
01-17-2021, 07:04 AM #2

Updated BIOS on motherboard after confirming the BIOS update to the newest version?
RTX 4070, current drivers
Previous GPU drivers handled with DDU, then reinstalled with latest from Nvidia site?

G
GamerTDMichael
Junior Member
6
01-17-2021, 08:44 AM
#3
I haven't cleared the CMOS yet, and these crashes occurred before the BIOS update. Should I clear my CMOS after a BIOS update? I can handle that easily.
I was using an RTX 3060ti and wiped the drivers with DDU when I installed the 4070, then downloaded new drivers through GeForce Experience.
EDIT: What I've done so far:
- Switched the boot drive Sata cable to another
- DDU'd my GPU drivers and reinstalled via GeForce Experience custom install
- Discovered I had manually set my RAM to 3200mhz instead of using DOCP as recommended, and allowed that to handle the overclocking; it's now on DOCP
- Reset CMOS using jumper pins and reapplied DOCP plus Fan curves
Currently the computer is running smoothly, so I'll just need to perform some stress tests to confirm.
G
GamerTDMichael
01-17-2021, 08:44 AM #3

I haven't cleared the CMOS yet, and these crashes occurred before the BIOS update. Should I clear my CMOS after a BIOS update? I can handle that easily.
I was using an RTX 3060ti and wiped the drivers with DDU when I installed the 4070, then downloaded new drivers through GeForce Experience.
EDIT: What I've done so far:
- Switched the boot drive Sata cable to another
- DDU'd my GPU drivers and reinstalled via GeForce Experience custom install
- Discovered I had manually set my RAM to 3200mhz instead of using DOCP as recommended, and allowed that to handle the overclocking; it's now on DOCP
- Reset CMOS using jumper pins and reapplied DOCP plus Fan curves
Currently the computer is running smoothly, so I'll just need to perform some stress tests to confirm.