Question fans and rgb not functioning
Question fans and rgb not functioning
Welcome to the forums, newcomer!
Have you seen this guide?
View: https://www.youtube.com/watch?v=OenLO0OCEKQ
The Infinity fans require a controller, so consider sharing an image of how the fans and hubs are connected on your platform.
9 fans working together? At the very least, pumps and radiator fans shouldn't share the same circuit as case fans. Is the hub linked to the MB and power supply? It needs a signal source.
Hey, thanks for the update. I've resolved the fans and lighting issues. It seems there was either a bad argb splitter between my 4090 lc and its radiator fans or insufficient power from the graphics card through the splitter to run two daisy chained argb fans. I moved the connection to the Ha-02 hub and everything worked properly with lights and fans. There was also another fan that didn't start at first, but I later realized the cables weren't properly connected because it was tightly fitted as an exhaust on the top corner of the case.
Yes. Two x2 connectors are set for the 240mm radius GPU, six x6 for the 360mm radius CPU (push/pull), and one x1 exhaust on the back. All components link to the hub except the CPU aio pump. I believe the Strix 4090 LC is managing its own pump.
The hub includes a Molex connector and an ARGB cable for the 3-pin header on the motherboard.