Question about Ripjaws V DDR4 C16 3200 MHZ to 4000 question
Question about Ripjaws V DDR4 C16 3200 MHZ to 4000 question
Do you know the timing settings for 4000 MHz? Is this possible? I have them at 3800 MHz with an Auros Master and a 9900kHz. I can share your current timing and voltage if needed. I applied XMP and only increased the voltage slightly.
For 4000MHz OC, consider using 18-20-20-40 at 1.36V with the command rate set to auto. This should allow it to post and run at the desired speed. You might also try 3733MHz with 16-16-16-38 at 1.36V; command rates 1 or 2 have worked previously.
Each time I attempt to reach 4000 MHZ my computer refuses to enter the Auros Master BIOS F12 screen, requiring a full reset of the BIOS. The RAM seems more intimidating to overclock than the CPU. I currently have it at 1.41V for 3800MHZ, and it operates between 16-18-18-38 MHz. The same memory brand and type are used.