Question About modular PSU (Gigabyte UD850GM) and motherboard (Gigabyte Z390 UD)
Question About modular PSU (Gigabyte UD850GM) and motherboard (Gigabyte Z390 UD)
The mobile works well with another PSU linked to the ATX_12V_2X2/ATX_12V_2X4, but this modular PSU lacks the right cables, so it was connected to the ATX input instead. During startup, the CPU LED on the mobile stays lit and doesn't turn off. This seems normal according to the manual. To ensure proper power delivery, you might want to get a 4-8 pin connector for the mobile and leave the ATX connector disconnected. Likewise, for the GTX1060, a 6-pin connector would be needed to provide any necessary power output.
Search for 8pin connectors that convert to 6pin plus 2pin. The UD850GM model should include these (each with two 6+2pin connectors). It works adequately for powering the GTX1060.
All necessary cables must come with this PSU from the manufacturer. Using incorrect cables is not allowed. A different PSU would be required if that's the case.
Unless you've misplaced some cables, everything should work fine.
ATX/MB 20+4 Pin x 1 : 610mm*1
CPU/EPS 4+4 Pin x 2 : 600mm*2
PCI-e 6+2 Pin x 4 : 600mm+150mm*2
SATA x 8 :
600mm+150mm+150mm+150mm*2
4 Pin Peripheral x 3+4-Pin floppy x 1 : 500mm+120mm+120mm+150mm*1
Sure, I managed to install another cable that matches the requirements, and the system starts up properly. It seems there isn't a 6-pin connector available for powering the GPU, which suggests this power supply might not be compatible with the GPU.
Search for 8pin connectors that convert to 6pin plus 2pin. The UD850GM model should include these (each with two 6+2pin connectors). It works adequately for powering the GTX1060.