F5F Stay Refreshed Hardware Desktop Question about memory optimization techniques

Question about memory optimization techniques

Question about memory optimization techniques

I
Intheworld061
Member
Find
62
02-09-2019, 02:33 AM
#1
Hey everyone, I own an DDR4 kit (two 8GB ADATA XPG Spectrix D41 boards from SK Hynix) with XMP set to 3000MHz clock speeds of 16-18-18-18-36. After testing, I reached a stable 3466 MHz at 1.45V. The 3600 MHz setting didn’t work, so I stick with the auto mode at 1.040V. I’ve adjusted the timings slightly from XMP to 16-17-17-35 and it’s still fine. Regarding the infinity fabric, it’s currently set to auto with MCLK = FCLK—should I keep that or tweak it manually to 1733?
Reply
Reply
I
Intheworld061
02-09-2019, 02:33 AM #1

Hey everyone, I own an DDR4 kit (two 8GB ADATA XPG Spectrix D41 boards from SK Hynix) with XMP set to 3000MHz clock speeds of 16-18-18-18-36. After testing, I reached a stable 3466 MHz at 1.45V. The 3600 MHz setting didn’t work, so I stick with the auto mode at 1.040V. I’ve adjusted the timings slightly from XMP to 16-17-17-35 and it’s still fine. Regarding the infinity fabric, it’s currently set to auto with MCLK = FCLK—should I keep that or tweak it manually to 1733?

Reply
Reply
M
MagiicCraft
Member
Find
107
02-09-2019, 10:41 AM
#2
These settings are secure, yet usually the values at the end need adjustment so the first figure (tCL) decreases. Set it to 1733 if unsure it won’t break at auto mode.
Reply
Reply
M
MagiicCraft
02-09-2019, 10:41 AM #2

These settings are secure, yet usually the values at the end need adjustment so the first figure (tCL) decreases. Set it to 1733 if unsure it won’t break at auto mode.

Reply
Reply