Question about LAN port setup

Pages (2): 1 2 Next

12-09-2016, 02:54 PM

I checked the details on your motherboard's specs. Your Rosewill CAT 6 cable didn't fit, and I wasn't sure if it matched the listed ports. The LAN port is Intel® I219-V, as shown in the manufacturer's documentation.

ComboMyWombo

12-09-2016, 02:54 PM #1

KRONICSHANKS
Junior Member

12-09-2016, 10:01 PM

Certainly fits since they use the same physical port. Would you like me to send an image?

KRONICSHANKS

12-09-2016, 10:01 PM #2

Certainly fits since they use the same physical port. Would you like me to send an image?

McsamXD
Member

182

12-09-2016, 11:03 PM

Ensure the end of the cable has a shield removed. If that fails, inspect your port for obstructions; an RJ45 cable should function properly.

McsamXD

12-09-2016, 11:03 PM #3

Ensure the end of the cable has a shield removed. If that fails, inspect your port for obstructions; an RJ45 cable should function properly.

seaholly
Junior Member

12-13-2016, 07:07 AM

It appears the issue isn't fully resolved; the response slipped away easily, making it hard to pinpoint the mistake.

seaholly

12-13-2016, 07:07 AM #4

It appears the issue isn't fully resolved; the response slipped away easily, making it hard to pinpoint the mistake.

SkyInsane
Senior Member

718

12-13-2016, 09:54 AM

The connection point on the cable appears to be detachable. Gently move it within the port to see if it comes loose.

SkyInsane

12-13-2016, 09:54 AM #5

The connection point on the cable appears to be detachable. Gently move it within the port to see if it comes loose.

ValerieDB
Junior Member

12-13-2016, 06:16 PM

Refers to the small plastic button for opening, but it isn't part of this process.

ValerieDB

12-13-2016, 06:16 PM #6

Refers to the small plastic button for opening, but it isn't part of this process.

Barackouda1
Member

12-15-2016, 03:56 AM

Are you asking about the origin of this cable—pre-made or handmade?

Barackouda1

12-15-2016, 03:56 AM #7

Are you asking about the origin of this cable—pre-made or handmade?

unicorn520
Member

208

12-16-2016, 01:29 PM

Bought on Newegg, it's a RoseWill cable https://www.newegg.com/p/N82E16812119161...6812119161

unicorn520

12-16-2016, 01:29 PM #8

Bought on Newegg, it's a RoseWill cable https://www.newegg.com/p/N82E16812119161...6812119161

hunchmuffin6
Member

209

12-16-2016, 04:16 PM

It seems the boot could be the problem. Make sure you firmly push the cable in and listen for a click, or carefully remove the boot around the clip if you need certainty.

hunchmuffin6

12-16-2016, 04:16 PM #9

It seems the boot could be the problem. Make sure you firmly push the cable in and listen for a click, or carefully remove the boot around the clip if you need certainty.

alicat428
Junior Member

12-23-2016, 09:59 AM

#10

I cut the boot and tried putting it in as far as I could and theres still nothing

alicat428

12-23-2016, 09:59 AM #10

I cut the boot and tried putting it in as far as I could and theres still nothing

Pages (2): 1 2 Next