F5F Stay Refreshed Hardware Desktop Q-Flash Plus X399 design concept

Q-Flash Plus X399 design concept

Q-Flash Plus X399 design concept

I
IlanDirt
Junior Member
Find
6
10-25-2018, 06:00 PM
#1
You're experiencing problems with the Q-flash Plus feature on your board. It seems there might be some configuration or compatibility issues. The motherboard doesn't support the 2920X until BIOS version F10, so you're using the correct update. However, since you're using a USB 2.0 drive formatted with FAT32, ensure it's properly connected and recognized by the system. Also, double-check that the BIOS file is correctly renamed to the expected location in the white USB port. The power switch seems to trigger the flashing sequence, but if nothing happens, verify the correct pin configuration for your PSU and motherboard. If you're still facing issues, consider consulting the official documentation or reaching out to the manufacturer's support for further guidance.
Reply
Reply
I
IlanDirt
10-25-2018, 06:00 PM #1

You're experiencing problems with the Q-flash Plus feature on your board. It seems there might be some configuration or compatibility issues. The motherboard doesn't support the 2920X until BIOS version F10, so you're using the correct update. However, since you're using a USB 2.0 drive formatted with FAT32, ensure it's properly connected and recognized by the system. Also, double-check that the BIOS file is correctly renamed to the expected location in the white USB port. The power switch seems to trigger the flashing sequence, but if nothing happens, verify the correct pin configuration for your PSU and motherboard. If you're still facing issues, consider consulting the official documentation or reaching out to the manufacturer's support for further guidance.

Reply
Reply