Purchase a 1 Gbps connection with both upload and download speeds, while Ethernet remains at 100 Mbps.
Purchase a 1 Gbps connection with both upload and download speeds, while Ethernet remains at 100 Mbps.
I possess a connection with 1.0 Gbps download and upload capabilities. My typical internet speed across the house ranges between 700-900 Mbps. I’m using the Google Nest Wifi Pro equipped with WiFi 6e. All my connections are made with CAT6 cables, and there are several switches involved. My router is linked to a switch that carries CAT6 cables to each room. The Ethernet port in my office then links to another switch (same type as before) which divides the signal to my personal PC and my work PC. What puzzles me is that occasionally I experience the full 1 Gbps after restarting my router, modem, or switches. However, after a few days or weeks, my Ethernet connection to my PC drops back down to around 100 Mbps. I’m unsure why this happens. All the switches are TP link 5 port devices advertised as Gigabit Switches.
It seems a switch might be malfunctioning. You could reset each device individually to identify which one is causing the problem. Also, check for cable issues by swapping them out one at a time. This issue happened in our office when a faulty cable caused intermittent speeds and dropped connections.
Verify the switch linked to your PC supports port negotiation at 1000Mbps full duplex. You can also adjust this setting within the network adapter configurations in Windows.
Ensure all your switches support Gigabit speeds and avoid Fast Ethernet (10/100). Verify your router includes Gigabit LAN ports. Consider removing the switches and connecting your PC directly to the router via the wall for a more stable connection. Depending on your home's age and installation, only two pairs of cables may be available at network jacks—this setup delivers 100 megabits but not full Gigabit performance. Some older contractors repurposed pairs for phone lines, which worked when consumer devices used 100 meg Ethernet.