F5F Stay Refreshed Hardware Desktop Problems with the Samsung G70A display and audio system.

Problems with the Samsung G70A display and audio system.

Problems with the Samsung G70A display and audio system.

O
opticgunship
Posting Freak
815
03-17-2021, 03:15 AM
#1
I recently purchased this monitor and linked external speakers to it. Occasionally, there’s a sudden burst of static noise, and I’m unsure what’s triggering it. When I connected the same speakers to another monitor, everything worked perfectly. Any advice would be greatly appreciated. My graphics card is an RTX 3060 Ti, and I’m using the Nvidia High Definition Audio driver. Additionally, I’ve faced problems with g-sync on this monitor, which has caused the PC to crash—this issue has now been resolved after turning off g-sync.
O
opticgunship
03-17-2021, 03:15 AM #1

I recently purchased this monitor and linked external speakers to it. Occasionally, there’s a sudden burst of static noise, and I’m unsure what’s triggering it. When I connected the same speakers to another monitor, everything worked perfectly. Any advice would be greatly appreciated. My graphics card is an RTX 3060 Ti, and I’m using the Nvidia High Definition Audio driver. Additionally, I’ve faced problems with g-sync on this monitor, which has caused the PC to crash—this issue has now been resolved after turning off g-sync.

T
therealboss13
Member
161
03-17-2021, 08:25 AM
#2
Check for any available updates in the new monitor software. It seems there are some issues to address.
T
therealboss13
03-17-2021, 08:25 AM #2

Check for any available updates in the new monitor software. It seems there are some issues to address.

D
Dillion55
Junior Member
10
03-17-2021, 10:09 AM
#3
Hello, congratulations on your new purchase! I understand you're experiencing the same issue with the same model as before. Have you found a solution or decided to return the monitor?
D
Dillion55
03-17-2021, 10:09 AM #3

Hello, congratulations on your new purchase! I understand you're experiencing the same issue with the same model as before. Have you found a solution or decided to return the monitor?

B
BoojGamer2006
Member
59
03-17-2021, 02:37 PM
#4
Which connection are you employing? DP or HDMI? Was it included with the display or another type?
B
BoojGamer2006
03-17-2021, 02:37 PM #4

Which connection are you employing? DP or HDMI? Was it included with the display or another type?

L
lukymistr
Member
68
03-17-2021, 03:24 PM
#5
I also encountered the same problem. It caused me to tap a few times, so I unplugged the speakers. Have anyone had success fixing it?
L
lukymistr
03-17-2021, 03:24 PM #5

I also encountered the same problem. It caused me to tap a few times, so I unplugged the speakers. Have anyone had success fixing it?

E
ES_BlackFire
Member
68
03-30-2021, 07:25 AM
#6
I resolved the problem after more than two weeks of troubleshooting by updating to firmware version 1004.0. I downloaded it from the Samsung website. The necessary changes included renaming the file name from M-A7000GGZA-1004.0[8BE3].img to M-A7000GGZA-0000.0[8BE3].img. After that, formatting the USB drive as FAT32 was essential. When inserting the USB into the service port, the monitor must be turned off and then back on. The current firmware 1008.1 didn’t work either. If anyone has other firmware options to try, I’m open to experimenting, as 1004.0 is quite outdated. M-A7000GGZA-1004.0.zip
E
ES_BlackFire
03-30-2021, 07:25 AM #6

I resolved the problem after more than two weeks of troubleshooting by updating to firmware version 1004.0. I downloaded it from the Samsung website. The necessary changes included renaming the file name from M-A7000GGZA-1004.0[8BE3].img to M-A7000GGZA-0000.0[8BE3].img. After that, formatting the USB drive as FAT32 was essential. When inserting the USB into the service port, the monitor must be turned off and then back on. The current firmware 1008.1 didn’t work either. If anyone has other firmware options to try, I’m open to experimenting, as 1004.0 is quite outdated. M-A7000GGZA-1004.0.zip

P
Pearple
Junior Member
48
04-06-2021, 08:55 AM
#7
I know this is old now but my previous solution of downgrading the firmware did not work for long. I now have accessed the service menu and turned off the ERP setting in the monitor which is a power saving measure. So far so good. You can access the service menu by turning brightness and contrast to 0 and then selecting and holding the 'information' setting. I hope this helps someone.
P
Pearple
04-06-2021, 08:55 AM #7

I know this is old now but my previous solution of downgrading the firmware did not work for long. I now have accessed the service menu and turned off the ERP setting in the monitor which is a power saving measure. So far so good. You can access the service menu by turning brightness and contrast to 0 and then selecting and holding the 'information' setting. I hope this helps someone.