F5F Stay Refreshed Hardware Desktop Problems with the newly built PC

Problems with the newly built PC

Problems with the newly built PC

G
GamenMetLeviNL
Senior Member
638
08-31-2021, 06:36 PM
#1
Hi guys, I just shared a build I did recently. Here’s the link: https://forums. After a week, I assembled it and noticed some problems, probably due to the RAM. When I tried to boot, the red light on the MOBO for DRAM was on, even after swapping or using a single stick. I left it running for about 10 to 15 minutes and it worked. Later, the VGA red light came on and stayed lit. I managed to fix it and installed Windows 11. Now after setup, both RAM and GPU are shown, but when I restart, the red lights stay on and it doesn’t display anything on the screen unless I power it off. Also, I can’t access BIOS. Think the issue is with the RAM or the motherboard? Please help.
G
GamenMetLeviNL
08-31-2021, 06:36 PM #1

Hi guys, I just shared a build I did recently. Here’s the link: https://forums. After a week, I assembled it and noticed some problems, probably due to the RAM. When I tried to boot, the red light on the MOBO for DRAM was on, even after swapping or using a single stick. I left it running for about 10 to 15 minutes and it worked. Later, the VGA red light came on and stayed lit. I managed to fix it and installed Windows 11. Now after setup, both RAM and GPU are shown, but when I restart, the red lights stay on and it doesn’t display anything on the screen unless I power it off. Also, I can’t access BIOS. Think the issue is with the RAM or the motherboard? Please help.

M
Mojangman82
Junior Member
5
08-31-2021, 10:59 PM
#2
It looks like the processor might be having trouble. You could try placing the PC on its side or flat, easing any pressure on the cooler until it rests gently on the CPU's IHS. Check if you can boot up without any issues or lights flickering.
M
Mojangman82
08-31-2021, 10:59 PM #2

It looks like the processor might be having trouble. You could try placing the PC on its side or flat, easing any pressure on the cooler until it rests gently on the CPU's IHS. Check if you can boot up without any issues or lights flickering.

S
shupshep
Member
143
09-01-2021, 07:41 PM
#3
ok hold on let me try that
S
shupshep
09-01-2021, 07:41 PM #3

ok hold on let me try that

B
bigsmarty
Junior Member
9
09-08-2021, 11:10 PM
#4
I attempted and it mostly happened:
Initial restart took about 20 seconds, but the DRAM displayed a red signal and then switched to VGA before both powering down.
Later, I tried to progress the reboot to enter BIOS while it remained idle.
B
bigsmarty
09-08-2021, 11:10 PM #4

I attempted and it mostly happened:
Initial restart took about 20 seconds, but the DRAM displayed a red signal and then switched to VGA before both powering down.
Later, I tried to progress the reboot to enter BIOS while it remained idle.