F5F Stay Refreshed Power Users Overclocking Problemi di riscaldamento 13600k nel turbo

Problemi di riscaldamento 13600k nel turbo

Problemi di riscaldamento 13600k nel turbo

R
Redstoner137
Posting Freak
811
10-25-2022, 10:21 PM
#1
Processor: 13600K.
Cooler: TH240 ARGB.
Motherboard: B660 F-Gaming
RAM: G.Skill 6000MHz 2X16.
Case: Zalman Z11Neo. (There are a total of 3 Akasa Viper fans, 2 at the front and 1 at the back)
Graphics card: RX480 8 GB.
Hello everyone, I recently renewed my system and I am experiencing heating problems, low FPS in competitive games, and if I open the browser, the system suddenly heats up and turns the fans to the highest speed. This problem has been going on for a long time, I prepared as much data as I could for you to evaluate. I am using the LGA1700 mounting kit from Thermaltake for TH240. I didn't forget the gelatin under the cooling block. Paste Thermal Grizzly Kryonaut. When Turbo mode is off, there is no heating, no sound, in short, no problem, but what happens when I turn on Turbo mode annoys me like this. I tried to undervolt but I couldn't do it very well. I would appreciate it if you could help me with undervolting. I read the ThrottleStop topic and did what it said, but it doesn't work on my PC, I don't know why. I don't fully understand whether these settings can be made in the AI Suite software. When I do it through the BIOS, the temperatures are slightly better, but at the same time, the FPS drops without getting a blue screen in the games. Actually, I couldn't do it properly because the BIOS and ThrottleStop are a little different.
I will be installing an RTX 4080 into the system soon and I want to solve this problem before that.
In the tests, all values were set to Auto or default in the BIOS.
13600K Turbo modda ısınıyor
İşlemci: 13600K. Soğutucu: TH240 ARGB. Anakart: B660 F-Gaming RAM: G.Skill 6000MHz 2X16. Kasa: Zalman Z11Neo. (2 önde 1 arkada toplam 3 Akasa Viper fan mevcut) Ekran kartı: RX480 8 GB. Selam herkese yakın zamanda sistemimi yeniledim ısınma sorunu yaşıyorum, rekabetçi oyunlarda FPS düşüklüğü...
www.technopat.net
There are photos showing the temperature values in the subject in the link. Since I can't upload it here, I'm showing it from there.
R
Redstoner137
10-25-2022, 10:21 PM #1

Processor: 13600K.
Cooler: TH240 ARGB.
Motherboard: B660 F-Gaming
RAM: G.Skill 6000MHz 2X16.
Case: Zalman Z11Neo. (There are a total of 3 Akasa Viper fans, 2 at the front and 1 at the back)
Graphics card: RX480 8 GB.
Hello everyone, I recently renewed my system and I am experiencing heating problems, low FPS in competitive games, and if I open the browser, the system suddenly heats up and turns the fans to the highest speed. This problem has been going on for a long time, I prepared as much data as I could for you to evaluate. I am using the LGA1700 mounting kit from Thermaltake for TH240. I didn't forget the gelatin under the cooling block. Paste Thermal Grizzly Kryonaut. When Turbo mode is off, there is no heating, no sound, in short, no problem, but what happens when I turn on Turbo mode annoys me like this. I tried to undervolt but I couldn't do it very well. I would appreciate it if you could help me with undervolting. I read the ThrottleStop topic and did what it said, but it doesn't work on my PC, I don't know why. I don't fully understand whether these settings can be made in the AI Suite software. When I do it through the BIOS, the temperatures are slightly better, but at the same time, the FPS drops without getting a blue screen in the games. Actually, I couldn't do it properly because the BIOS and ThrottleStop are a little different.
I will be installing an RTX 4080 into the system soon and I want to solve this problem before that.
In the tests, all values were set to Auto or default in the BIOS.
13600K Turbo modda ısınıyor
İşlemci: 13600K. Soğutucu: TH240 ARGB. Anakart: B660 F-Gaming RAM: G.Skill 6000MHz 2X16. Kasa: Zalman Z11Neo. (2 önde 1 arkada toplam 3 Akasa Viper fan mevcut) Ekran kartı: RX480 8 GB. Selam herkese yakın zamanda sistemimi yeniledim ısınma sorunu yaşıyorum, rekabetçi oyunlarda FPS düşüklüğü...
www.technopat.net
There are photos showing the temperature values in the subject in the link. Since I can't upload it here, I'm showing it from there.

C
Celine_VL
Junior Member
7
10-26-2022, 06:47 AM
#2
Welcome to the forums, newcomer!
Hello everyone, I've just renewed my system and am facing heating issues, low FPS in competitive games, and when I open the browser, the system overheats and the fans reach maximum speed.
I think you're referring to a system upgrade. If that's the case, please share your specifications like this:
CPU:
CPU cooler:
Motherboard:
RAM:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Please include the age of the PSU along with its make and model. Also, the BIOS version for your motherboard at this time.
We should see a clear improvement before and after on your PC specs.
How is the AIO installed in your build or case?
Does fixing the issue work if you remove all side panels? I'd also like to know the fan orientation on your AIO.
C
Celine_VL
10-26-2022, 06:47 AM #2

Welcome to the forums, newcomer!
Hello everyone, I've just renewed my system and am facing heating issues, low FPS in competitive games, and when I open the browser, the system overheats and the fans reach maximum speed.
I think you're referring to a system upgrade. If that's the case, please share your specifications like this:
CPU:
CPU cooler:
Motherboard:
RAM:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Please include the age of the PSU along with its make and model. Also, the BIOS version for your motherboard at this time.
We should see a clear improvement before and after on your PC specs.
How is the AIO installed in your build or case?
Does fixing the issue work if you remove all side panels? I'd also like to know the fan orientation on your AIO.

W
Winkler1212
Member
172
10-26-2022, 03:29 PM
#3
Well, there's your problem...
Is the "turbo mode" you mention also a bios setting?!
If so the mobo uses values that are too high and you will have to set everything by hand, but mainly PL1 PL2.
W
Winkler1212
10-26-2022, 03:29 PM #3

Well, there's your problem...
Is the "turbo mode" you mention also a bios setting?!
If so the mobo uses values that are too high and you will have to set everything by hand, but mainly PL1 PL2.