F5F Stay Refreshed Hardware Desktop Problem with the thread ripper construction

Problem with the thread ripper construction

Problem with the thread ripper construction

F
firefighter249
Junior Member
Find
16
04-23-2019, 02:10 PM
#1
I recently purchased a used Gigabyte Aorus master trx40 after putting together my entire setup, and the DRAM indicator lit up. I've experimented with three distinct RAM modules at various speeds. The BIOS reset and battery replacement didn't help—ram still won't recognize. Testing the power supply and RAM on another machine confirmed everything functions properly. The Mbios light also activates when the computer is on. If you have any advice, please share. I've cleaned the RAM and tried everything else. I double-checked the manual, confirming the slots A2 and B2 are correctly used and fully seated. I've also tested DDR4-2400 CMV8Gx4M1A2400C16, DDR4-2666 CMK8GX4M2A2666C14, and TF3D416G3200HC16CDC01 at 3200mhz with dual 8GB.
Reply
Reply
F
firefighter249
04-23-2019, 02:10 PM #1

I recently purchased a used Gigabyte Aorus master trx40 after putting together my entire setup, and the DRAM indicator lit up. I've experimented with three distinct RAM modules at various speeds. The BIOS reset and battery replacement didn't help—ram still won't recognize. Testing the power supply and RAM on another machine confirmed everything functions properly. The Mbios light also activates when the computer is on. If you have any advice, please share. I've cleaned the RAM and tried everything else. I double-checked the manual, confirming the slots A2 and B2 are correctly used and fully seated. I've also tested DDR4-2400 CMV8Gx4M1A2400C16, DDR4-2666 CMK8GX4M2A2666C14, and TF3D416G3200HC16CDC01 at 3200mhz with dual 8GB.

Reply
Reply